Ryobi R18iW3-0 - Инструкция по эксплуатации - Страница 3

English

1

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

EL

Safety, performance, and dependability have been given 
top priority in the design of your impact wrench.

INTENDED USE

The impact wrench is intended to be used only by adults 
who have read and understood the instructions and 
warnings in this manual, and can be considered responsible 
for their actions.
The product is intended for fastening and removing screws 
and bolts using an impact socket.
The product is intended for consumer use only. 
Do not use the product for any other purpose. Use of the 
product for operations different from intended could result 
in a hazardous situation.

 WARNING

Read all safety warnings, instructions, illustrations 
and specifications provided with this power tool.

Failure to follow all instructions listed below may result in 
electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

.

IMPACT WRENCH SAFETY WARNINGS

Ŷ

Hold the power tool by insulated gripping surfaces, 
when performing an operation where the fastener 
may contact hidden wiring.

 Fasteners contacting a 

“live” wire may make exposed metal parts of the power 
tool “live” and could give the operator an electric shock.

Ŷ

Ambient temperature range for tool during operation is 
between 0°C and 40°C.

Ŷ

Ambient temperature range for tool storage is between 
0°C and 40°C.

Ŷ

The recommended ambient temperature range for the 
charging system during charging is between 10°C and 
38°C.

ADDITIONAL BATTERY SAFETY WARNINGS

 WARNING

To reduce the risk of fire, personal injury, and product 
damage due to a short circuit, never immerse your 
tool, battery pack or charger in fluid or allow a fluid to 
flow inside them. Corrosive or conductive fluids, such 
as seawater, certain industrial chemicals, and bleach 
or bleach-containing products, etc., can cause a short 
circuit.

Ŷ

Ambient temperature range for battery during use is 
between 0°C and 40°C.

Ŷ

Ambient temperature range for battery storage is 
between 0°C and 20°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 

provisions and regulations.
Follow all special requirements on packaging and labelling 

when transporting batteries by a third party. Ensure that 

no batteries can come in contact with other batteries 

or conductive materials while in transport by protecting 

exposed connectors with insulating, non-conductive caps 

or tape. Do not transport batteries that are cracked or 

leaking. Check with the forwarding company for further 

advice.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 
impossible to completely eliminate certain residual risk 
factors. The following hazards may arise and the operator 
should pay special attention to avoid the following:

Ŷ

Damage to hearing caused by noise

–

Wear suitable hearing protection and limit exposure.

Ŷ

Injury to the eyes

–

Wear protective eye shields or goggles when using 
the product.

Ŷ

Injury caused by vibration

–

Limit exposure. Follow the instructions in Risk 
Reduction.

Ŷ

Electric shock caused by contact with hidden wires

–

Hold the product only by insulated services.

Ŷ

Injury caused by dust

–

Dust created by operating the product can cause 
respiratory injury. Wear appropriate dust control 
mask with filters suitable for protecting against 
particles from the material being worked on.

RISK REDUCTION

It has been reported that vibrations from hand-held tools 

may contribute to a condition called Raynaud’s Syndrome 

in certain individuals. Symptoms may include tingling, 

numbness and blanching of the fingers, usually apparent 

upon exposure to cold. Hereditary factors, exposure to 

cold and dampness, diet, smoking and work practices 

are all thought to contribute to the development of these 

symptoms. There are measures that can be taken by the 

operator to possibly reduce the effects of vibration:

Ŷ

Keep your body warm in cold weather. When operating 

the unit wear gloves to keep the hands and wrists 

warm. It is reported that cold weather is a major factor 

contributing to Raynaud’s Syndrome.

Ŷ

After each period of operation, exercise to increase 

blood circulation.

Ŷ

Take frequent work breaks. Limit the amount of 

exposure per day.

If you experience any of the symptoms of this condition, 

immediately discontinue use and see your doctor about 

these symptoms.