Metabo SSW (602205890) - Инструкция по эксплуатации - Страница 9

ENGLISH

en

9

If performance diminishes, recharge the battery 

pack.
The ideal storage temperature is between 10°C and 

30°C.
"Li-Power" li-ion battery packs have a capacity and 

signal indicator: (9)

- Press the button  (8), the LEDs indicate the charge 

level.

- If one LED is flashing, the battery pack is almost 

flat and must be recharged.

Removal:

Press the battery pack release  (7) button and pull 

the battery pack (5) forwards.

Inserting:

Slide in the battery pack (5) until it engages.

6.2 Setting the direction of rotation, engag-

ing the transporting safety device 

(switch-on lock)

Do not actuate the rotation selector switch or 

engage the transportation lock (2) unless the 

motor has stopped completely!

Actuate the rotation selector switch / Engage the 

transportation lock  (2)

R

= Right rotation set 

(insert screws)

L

= Left rotation set 

(remove screws)

0

= Central position: transportation lock setting

(switch-on lock)

6.3 Switching on and off

Switching on:

 press the trigger switch (3).

Switching off

: release the trigger switch (3).

6.4 Speed / Tightening torque

The speed and tightening torque are connected 

directly. The lower the speed, the lower the tight-

ening torque.
The speed and tightening torque can be adjusted 

steplessly by pressing the trigger (3) firmly or lightly, 

thus adapting to working conditions. 
You can use the setting wheel (5) on the SSW 18 

LTX 400 BL to adjust the rotational speed and tight-

ening torque (12 stages).

Recommendation:

 determine the correct setting 

by carrying out trial screwdriving. 

6.5 Changing SSW... screwdriving bits

Inserting screwdriving bit:

 Fit the tool on the 

square attachment  (1) until the limit stop.

Removing screwdriving bit:

 Pull the tool from the 

square attachment (1).

The screwdriving bit used must match the 

screw.
Damaged screwdriving bits must not be used.

Mount the machine on the screw, ensuring it is 

aligned straight. 
The screwdriving process has two elements: 

inserting the screw

 and 

tightening the screw with the percussion mech-

anism.

The tightening torque depends on the impact dura-

tion.

With an impact duration of approx. 5 seconds, the 

maximum tightening torque has been reached.
The torque curve depends on the type of applica-

tion:
With a hard screwdriving application (screw-

couplings in hard material such as metal), maximum 

tightening torque is already reached after a short 

impact duration (a).
With a soft screwdriving application (screw-

couplings in soft material such as wood), a longer 

impact duration (b) is required.
Recommendation: determine the correct impact 

duration by carrying out trial screwdriving. 

Caution!

 With 

small screws, 

maximum torque can 

be reached even below an impact duration of 0.5 

seconds.
- This is why the duration of the screwdriving 

process must be monitored exactly. 

- Adjust the tightening torque by pressing firmly or 

lightly on the trigger (3), ensuring that the screw is 

not damaged or that the screw head does not tear 

off.

Use only genuine Metabo accessories.
Use only accessories that fulfil the requirements 

and specifications listed in these operating instruc-

tions.
See page 4.

A Chargers

B Battery packs with different capacity

Only use battery packs with the appropriate 

voltage for your power tool.

C Screwdriving bits

D 1/2“  tool

For a complete range of accessories, see 

www.metabo.com or the catalogue.

7. Use

8. Accessories