Metabo SSW (602205890) - Инструкция по эксплуатации - Страница 8

ENGLISH

en

8

Original instructions

We declare under our sole responsibility: These 

cordless impact drivers, identified by type and serial 

number *1), comply with all relevant requirements of 

the directives *2) and standards *3). Technical file 

at *4) - see page 3.

The impact screwdriver is suitable for driving in and 

removing screws.
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention regula-

tions and the enclosed safety information must be 

observed.

For your own protection and for the 

protection of your power tool, pay atten-

tion to all parts of the text that are marked 

with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

Hold power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting fastener may contact hidden wiring.

Fasteners contacting a "live" wire, may make 

exposed metal parts of the power tool "live" and 

could give the operator an electric shock.
Remove the battery pack from the machine before 

any adjustment or maintenance is carried out.
Before fitting the battery pack, make sure that the 

machine is switched off.
Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

using a metal detector).

Protect battery packs from water and mois-

ture!

Do not expose battery packs to naked flame!

Do not use faulty or deformed battery packs!

Do not open battery packs!

Do not touch or short-circuit battery packs!

Slightly acidic, flammable fluid may leak from 

defective li-ion battery packs! 
If battery fluid leaks out and comes into 

contact with your skin, rinse immediately 

with plenty of water. If battery fluid leaks out 

and comes into contact with your eyes, wash them 

with clean water and seek medical attention imme-

diately.
Only screwdriving bits suitable for the impact screw-

driver must be used.
Take care when driving in long screws - risk of slip-

ping.
Mount the machine on the screw only when it is 

switched off.

Wear ear protectors when working for long 

periods of time.

 High noise levels over a 

prolonged period of time may affect your hearing.
Materials that generate dusts or vapours that may 

be harmful to health (e.g. asbestos) must not be 

processed.
Remove the battery pack from the machine before 

any adjustments, conversions or servicing are 

performed.
LED lights (4): Do not observe the LED radiation 

directly with optical instruments.

See page 2.

1 Square attachment for  1/2“ tools

2 Rotation selector switch / Transporting safety 

device

3 Trigger

4 LED  light

For working on dimly lit areas. The LED lights 

light up when the machine is switched on.

5 Setting wheel for preselecting rotational speed 

and tightening torque*

6 Battery pack

7 Battery pack release button

8 Capacity indicator button

9 Capacity and signal indicator

10 Belt hook (attach as shown) *

* depending on the features / model

Remove the battery pack from the machine 

before any adjustment or maintenance is 

carried out. Before fitting the battery pack, make 

sure that the machine is switched off.

6.1 Battery pack

Charge the battery pack before use (5).

1. Declaration of Conformity

2. Specified Use

3. General safety instructions

4. Special Safety Instructions

5. Overview

6. Initial Operation/Setting