Makita DTW 1001 Z - Инструкция по эксплуатации - Страница 3

3 ENGLISH

Model DTW1002

Work mode: impact tightening of fasteners of the maxi

-

mum capacity of the tool

Vibration emission (a

h

) : 18.0 m/s

2

Uncertainty (K) : 1.5 m/s

2

Model DTW800

Work mode: impact tightening of fasteners of the maxi

-

mum capacity of the tool

Vibration emission (a

h

) : 24.0 m/s

2

Uncertainty (K) : 2.0 m/s

2

Work mode: drilling into wood

Vibration emission (a

h

) : 7.0 m/s

2

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration emission value has 

been measured in accordance with the standard test 

method and may be used for comparing one tool with 

another.

NOTE:

 The declared vibration emission value 

may also be used in a preliminary assessment of 

exposure.

WARNING:

The vibration emission during actual 

use of the power tool can differ from the declared emission 

value depending on the ways in which the tool is used.

WARNING:

 Be sure to identify safety measures 

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking 

account of all parts of the operating cycle such as 

the times when the tool is switched off and when it is 

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

Makita declares that the following Machine(s):

Designation of Machine: Cordless Impact Wrench

Model No./ Type: DTW1001, DTW1002, DTW800

Conforms to the following European Directives: 2006/42/EC

They are manufactured in accordance with the following 

standard or standardized documents: EN60745

The technical file in accordance with 2006/42/EC is 

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

13.5.2015

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

General power tool safety warnings

WARNING:

Read all safety warnings and 

all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Work area safety

1. 

Keep work area clean and well lit.

 Cluttered or 

dark areas invite accidents.

2. 

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

3. 

Keep children and bystanders away while 

operating a power tool.

 Distractions can cause 

you to lose control.

Electrical Safety

1. 

Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools. 

Unmodified plugs and matching outlets will 

reduce risk of electric shock.

2. 

Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators.

 There is an increased risk of elec

-

tric shock if your body is earthed or grounded.

3. 

Do not expose power tools to rain or wet con-

ditions.

 Water entering a power tool will increase 

the risk of electric shock.

4. 

Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges 

or moving parts.

 Damaged or entangled cords 

increase the risk of electric shock.

5. 

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of 

a cord suitable for outdoor use reduces the risk of 

electric shock.

6. 

If operating a power tool in a damp location 

is unavoidable, use a residual current device 

(RCD) protected supply.

 Use of an RCD reduces 

the risk of electric shock.

Personal Safety

1. 

Stay alert, watch what you are doing and use 

common sense when operating a power tool. 

Do not use a power tool while you are tired or 

under the influence of drugs, alcohol or med

-

ication.

 A moment of inattention while operating 

power tools may result in serious personal injury.

2. 

Use personal protective equipment. Always 

wear eye protection.

 Protective equipment such 

as dust mask, non-skid safety shoes, hard hat, or 

hearing protection used for appropriate conditions 

will reduce personal injuries.

3. 

Prevent unintentional starting. Ensure the 

switch is in the off-position before connecting 

to power source and/or battery pack, picking 

up or carrying the tool.

 Carrying power tools with 

your finger on the switch or energising power tools 

that have the switch on invites accidents.

4. 

Remove any adjusting key or wrench before 

turning the power tool on.

 A wrench or a key left 

attached to a rotating part of the power tool may 

result in personal injury.

5. 

Do not overreach. Keep proper footing and 

balance at all times.

 This enables better control 

of the power tool in unexpected situations.

6. 

Dress properly. Do not wear loose clothing 

or jewellery. Keep your hair, clothing, and 

gloves away from moving parts.

 Loose clothes,