Bort BSR-900 - Инструкция по эксплуатации - Страница 5

5

Corded impact wrench

TECHNICAL DATA  

 1 

OPERATION  

 2 

THE COMPLETE SET INCLUDES:

1.  Accessories set

2.  Extra set of carbon brushes

GENERAL POWER TOOL SAFETY 

WARNINGS

Read all safety warnings and all instructions. 

Failure to follow the warnings and instructions 

may  result  in  electric  shock,  fire  and/or  serious 

injury. Save all warnings and instructions for 

future  reference.  The  term  “power  tool”  in  the 

warnings refers to your mainsoperated (corded) 

power tool or battery-operated (cordless) power 

tool.

WORK AREA  SAFETY

●  Keep work area clean and well lit. Cluttered or 

dark areas invite accidents.

●  Do not operate power tools in explosive atmo

-

spheres, such as in the presence of flamma

-

ble liquids, gases or dust. Power tools create 

sparks which may ignite the dust or fumes.

●  Keep children and bystanders away while op

-

erating a power tool. Distractions can cause 

you to lose control.

ELECTRICAL SAFETY

●  Power tool plugs must match the outlet. Nev

-

er modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools. Unmodified plugs and matching outlets 

will reduce risk of electric shock.

●  Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges 

and  refrigerators.  There  is  an  increased  risk 

of electric shock if your body is earthed or 

grounded.

●  Do  not  expose  power  tools  to  rain  or  wet 

conditions. Water entering a power tool will 

increase the risk of electric shock.

●  Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep  cord  away  from  heat,  oil,  sharp  edges 

and moving parts. Damaged or entangled 

cords increase the risk of electric shock.

PERSONAL SAFETY

●  Stay alert, watch what you are doing and use 

common sense when operating a power tool. 

Do not use a power tool while you are tired or 

under the influence of drugs, alcohol or medi

-

cation. A moment of inattention while operat-

ing power tools may result in serious personal 

injury.

●  Use  personal  protective  equipment.  Always 

wear  eye  protection.  Protective  equipment 

such as dust mask, non-skid safety shoes, 

hard hat, or hearing protection used for ap-

propriate conditions will reduce personal in-

juries.  Prevent  unintentional  starting.  Ensure 

the  switch  is  in  the  off-position  before  con

-

necting to power source and/or battery pack, 

picking up or carrying the tool. Carrying power 

tools with your finger on the switch or energis

-

ing power tools that have the switch on invites 

accidents.

●  Remove  any  adjusting  key  or  wrench  before 

turning the power tool on. A wrench or a key 

left attached to a rotating part of the power 

tool may result in personal injury.

●  Do  not  overreach.  Keep  proper  footing  and 

balance at all times. This enables better con

-

trol of the power tool in unexpected situa-

tions.

●  Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves 

away from moving parts. Loose clothes, jew-

ellery or long hair can be caught in moving 

parts.

POWER TOOL USE AND CARE

●  Do  not  force  the  power  tool.  Use  the  correct 

power  tool  for  your  application.  The  correct 

power tool will do the job better and safer at 

the rate for which it was designed.

●  Do  not  use  the  power  tool  if  the  switch  does 

not turn it on and off. Any power tool that can

-

not be controlled with the switch is dangerous 

and must be repaired.

●  Disconnect  the  plug  from  the  power  source 

and/or the battery pack from the power tool 

before making any adjustments, changing ac-

cessories, or storing power tools. Such pre-

ventive safety measures reduce the risk of 

starting the power tool accidentally.

●  Store idle power tools out of the reach of chil

-

dren and do not allow persons unfamiliar with 

the power tool or these instructions to operate 

the power tool. Power tools are dangerous in 

the hands of untrained users.

●  Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts 

and  any  other  condition  that  may  affect  the 

power tool’s operation. If damaged, have the