Фритюрницы Kenwood DF560 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
5
Troubleshooting guide
Problem
Possible Cause
Solution
Fryer does not work/
Fryer not plugged in
Check fryer is plugged in.
ON/OFF button not lit
ON/OFF button not in ON position
Check ON/OFF button is
pushed in.
Fuse blown
Check the fuse/circuit breaker
for your installation and replace
the fuse if necessary. If this does
not solve the problem refer to the
“service” section.
Electronic control unit not fitted
Check that electronic control is
inserted properly.
Red light on temperature control
Oil change light operating
Clean fryer and change oil.
unit come on
Switch fryer on.
Reset button by pressing and
holding in for 2-3 seconds.
Temperature light solid and not flashing
Normal operation -
Wait for light to start flashing
Correct frying temperature not reached
before frying.
yet
Temperature not recovered from previous
frying session.
Oil overflowing
Maximum oil level exceeded
Check oil level.
Basket overloaded/maximum chip
Refer to frying chart for
capacity exceeded
recommended quantities.
Wet food placed in oil
Drain and dry food thoroughly.
The oil is old and has deteriorated
Replace with fresh oil.
Incorrect oil used/different oils
Use a good quality oil suitable
mixed together
for deep frying.
Unpleasant Odour/Oil smokes
The oil is old and has deteriorated
Replace with fresh oil.
The oil is not suitable for deep frying
Use a good quality oil suitable
for deep frying.
Poor Frying performance
Incorrect temperature used
Select the correct temperature.
Basket overloaded
Reduce the quantity fried.
Fresh chips too wet
Drain and dry the chips thoroughly.
Frying method
Try batch method for fresh chips
170°C for 9–11 minutes
Then increase temperature to
190°C and cook for a further 1–2
minutes.
