Kenwood DF310 - Инструкция по эксплуатации - Страница 5

Фритюрницы Kenwood DF310 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 42
Загружаем инструкцию
background image

know your Kenwood deep fryer

safety

Never plug in the fryer before filling the bowl with oil.

Keep children away during use and after - fat stays hot
for a long time.

Never let the cord touch hot surfaces or hang down
over the worktop edge - a child could grab it and pull
the fryer down.

Never touch the bowl, pour away oil or move your fryer
while the oil’s hot.

After cleaning, ensure all parts are completely dry
before use.

Never leave your fryer on unattended.

This fryer is not intended for use by young children or
infirm persons without supervision.

Young children should be supervised to ensure that
they do not play with this appliance.

Do not use if there is any damage to the fryer, cord or
plug. Get it checked or repaired: see ‘service’.

Watch out for steam during cooking and when you
open the lid.

Never put your fryer near or on cooker hot plates.

This fryer is for domestic use only.

Always unplug the fryer after use.

before plugging in

Make sure your electricity supply is the same as the
one shown on the underside of the fryer.

This machine complies with European Economic
Community Directive 89/336/EEC.

before using for the first time

1 Remove all packaging.
2 Dismantle: see ‘to dismantle, assemble and use your

fryer’.

3 Wash the parts: see ‘cleaning’.

know your Kenwood fryer

removable lid with permanent mesh filter

basket

handle lever

folding handle

basket rest

pouring lip (

)

fixed bowl

 

lid release

body

temperature control with neon light

to dismantle, assemble and use
your fryer

to dismantle

1 Push the lid release 

  

down to open the lid. Then lift

the lid off.

2 Lift up the handle and remove the basket.

to assemble and use

1 Pour in the oil. The level must be between the ‘MAX’

and ‘MIN’ marks.

2 Insert the basket and lower the handle by sliding the

lever 

forward. Close the lid.

3 Plug in and select the required temperature 

.

4 The light goes out when the oil reaches the right

temperature to start frying. Fill the basket and lower
into the oil. 

Don’t exceed the maximum food

quantities stated. 

The light will come on and off as

the fryer maintains the temperature.

5 When ready open the lid and raise the basket. To drain

the food hook the basket rest 

 

on the side of the

bowl .

To re-use oil, allow to cool then pour the oil through fine
muslin or absorbent paper.

Always unplug the fryer after use.

2

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Kenwood DF310?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"