Ryobi RTR18-0 (5133005654) - Инструкция по эксплуатации - Страница 3

Safety, performance, and dependability have been given 
top priority in the design of your trim router.

INTENDED USE

The trim router is intended to be used only by adults who 
have read and understood the instructions and warnings 
in this manual, and can be considered responsible for their 
actions.
The product is intended for precision woodworking tasks. 
The product is ideal for shaping the edge onto wood and 
trimming laminates.
The product should only be used in well ventilated areas.
The product is intended for consumer use only. Do not use 
the product for any other purpose.

WARNING!

Read all safety warnings, instructions, 

illustrations and specifications provided with this 
power tool.

 Failure to follow all instructions listed below 

may result in electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.

TRIM ROUTER SAFETY WARNINGS

■

Use clamps or another practical way to secure and 
support the workpiece to a stable platform.

 Holding 

the workpiece by your hand or against the body leaves it 
unstable and may lead to loss of control.

■

Use only rotary cutting bits of the correct shank diameter 
for the collet mounted.

■

Use only rotary cutting bits suitable for the speed of the 
product.

■

Use the dust collection device 

and

 connect a dust 

extraction vacuum when operating the product.

■

Do not switch on the product again after it has stalled. 
Switching it on again, can cause a kickback with high 
reaction force. Determine why the product has stalled 
and rectify it, paying heed to the safety instructions. If 
necessary, remove the insertion tool.

■

Injuries may be caused, or aggravated, by prolonged 
use of a tool. When using any tool for prolonged periods, 
ensure you take regular breaks.

■

Ambient temperature range for tool during operation is 
between 0°C and 40°C.

■

Ambient temperature range for tool storage is between 
0°C and 40°C.

■

The recommended ambient temperature range for the 
charging system during charging is between 10°C and 
38°C.

ADDITIONAL BATTERY SAFETY WARNINGS

■

To reduce the risk of fire, personal injury, and product 
damage due to a short circuit, never immerse your 
tool, battery pack or charger in fluid or allow a fluid to 
flow inside them. Corrosive or conductive fluids, such 
as seawater, certain industrial chemicals, and bleach 
or bleach-containing products, etc., can cause a short 
circuit.

■

Ambient temperature range for battery during use is 
between 0°C and 40°C.

■

Ambient temperature range for battery storage is 
between 0°C and 20°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 
provisions and regulations.
Follow all special requirements on packaging and labelling 
when transporting batteries by a third party. Ensure that 
no batteries can come in contact with other batteries 
or conductive materials while in transport by protecting 
exposed connectors with insulating, non-conductive caps or 
tape. Do not transport batteries that are cracked or leaking. 
Check with the forwarding company for further advice.

KNOW YOUR PRODUCT

See page 57.

1. Depth scale 
2. Battery port
3. On/off switch
4.  Variable speed dial
5. Motor housing
6. Zero reset
7.  Micro depth adjustment knob
8.  Motor release lever
9. Chip shield
10. Quick-release lever
11. Removable base
12. Handle, insulated gripping surface
13. Vacuum adaptor
14. Spindle lock
15. Hole
16. Collet nut
17. D-shaped subbase
18. 6 mm/6.35 mm collet
19. Wrench
20. Straight bit
21. Edge guide
22. Guide bars
23. Operator’s manual 
24. Battery pack
25. Charger

MAINTENANCE

■

The product should never be connected to a power 
supply when assembling parts, making adjustments, 
cleaning, performing maintenance, or when the product 
is not in use. Disconnecting the product from the power 
supply will prevent accidental starting that could cause 
serious injury.

■

When servicing, use only original manufacturer’s 
replacement parts, accessories and attachments. Use 
of any other parts may create a hazard or cause product 
damage.

■

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to various types of commercial 
solvents and may be damaged by their use. Use clean 
cloths to remove dirt, carbon dust, etc.

■

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact 
with plastic parts. Chemicals can damage, weaken or 
destroy plastic which may result in serious personal 
injury.

■

For greater safety and reliability, all repairs should be 
performed by an authorised service centre.

ENGLISH

EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL

3

Original Instructions