Ryobi R18TR-0 - Инструкция по эксплуатации - Страница 4

–

Wear appropriate dust mask with suitable filters that 
can protect against particles from the material of the 
workpiece. Do not eat, drink, or smoke in the work 
area. Ensure adequate ventilation and use the dust 
extraction accessories provided.

■

Injury from contact with the cutting bits

–

The bits are sharp and will become hot during use. 
Wear gloves when changing bits. Keep hands away 
from the cutting area at all times. Never hold the 
workpiece being cut in your hands or across your 
leg. Secure the workpiece whenever possible.

RISK REDUCTION

It has been reported that vibrations from handheld tools 
may contribute to a condition called Raynaud’s Syndrome 
in certain individuals. Symptoms may include tingling, 
numbness, and blanching of the 

fi

 ngers, usually apparent 

upon exposure to cold. Hereditary factors, exposure to 
cold and dampness, diet, smoking, and work practices 
are all thought to contribute to the development of these 
symptoms. There are measures that can be taken by the 
operator to possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. When operating 
the product, wear gloves to keep the hands and wrists 
warm. It is reported that cold weather is a major factor 
contributing to Raynaud’s Syndrome.

■

After each period of operation, exercise to increase 
blood circulation.

■

Take frequent work breaks. Limit the amount of 
exposure per day.

If you experience any of the symptoms of this condition, 
immediately discontinue use and see your doctor about 
these symptoms.

 WARNING

Injuries may be caused or aggravated by prolonged use 
of a tool. When using any tool for prolonged periods, 
ensure you take regular breaks.

ASSEMBLY

 WARNING

Do not use this product if it is not completely assembled 
or if any parts appear to be missing or damaged. Use of 
a product that is not properly and completely assembled 
or with damaged or missing parts could result in serious 
personal injury.

 WARNING

Do not attempt to modify this product or create 
accessories or attachments not recommended for use 
with this product. Any such alteration or modi

fi

 cation  is 

misuse and could result in a hazardous condition leading 
to possible serious personal injury.

KNOW YOUR PRODUCT

See page 87.

1. On/off switch
2. Battery port
3. Zero reset
4.  Micro depth adjustment knob
5. Motor housing
6. Depth scale
7. Removable base
8.  Motor release lever
9.  Quick release lever
10. Spindle lock
11. 6.35 mm collet
12. Collet nut
13. Square subbase
14. Wrench
15. 6 mm collet
16. Straight bit
17. Guide bars
18. Edge guide

MAINTENANCE

 WARNING

The product should never be connected to a power supply 
when you are assembling parts, making adjustments, 
cleaning, performing maintenance, or when the product 
is not in use. Disconnecting the product will prevent 
accidental starting that could cause serious injury.

■

When servicing, use only original manufacturer’s 

replacement parts. Use of any other parts may create a 
hazard or cause product damage.

 WARNING

For greater safety and reliability, all repairs should be 
performed by an authorised Ryobi service centre.

GENERAL

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to various types of commercial 
solvents and may be damaged by their use. Use clean 
cloths to remove dirt, carbon dust, etc.

 WARNING

Do not, at any time, let brake 

fl

 uids, gasoline, petroleum-

based products, and penetrating oils, come in contact 
with plastic parts. They contain chemicals that can 
damage, weaken, or destroy plastic.

The dust from plaster and wall board is abrasive and 
may cause premature failure of the product if it is allowed 
to enter the motor area. Always use the dust extraction 
accessory connected to a vacuum. Thoroughly clean the 
product after use by using a brush and a vacuum. Take 
care not to push dirt into the ventilation openings. Beware 
of using compressed air to clean the product because dust 
and grit can cause serious eye injury.

2

| English