Sony NEX-C3 - Инструкция по эксплуатации - Страница 162

GB

70

Troubleshooting

If you experience trouble with the camera, try the following solutions.

The battery pack cannot be installed.

• When you insert the battery pack, use the tip of the battery pack to push the 

lock lever (page 15).

• You can use an NP-FW50 battery pack only. Make sure that the battery is 

NP-FW50.

The remaining battery indicator is incorrect, or sufficient 
remaining battery indicator is displayed but the power runs out 
too quickly.

• This phenomenon occurs when you use the camera in an extremely hot or 

cold location.

• The battery pack is discharged. Install a charged battery pack (page 14).
• The battery pack is dead. Replace it with a new one.

Cannot turn on the camera.

• Install the battery pack correctly (page 15).
• The battery pack is discharged. Install a charged battery pack (page 14).
• The battery pack is dead. Replace it with a new one.

The power turns off suddenly.

• When the camera or battery pack is too warm, the camera displays a warning 

message and turns off automatically to protect the camera.

1

Check the items on pages 70 to 73. Also refer to 
“

α

Handbook” (PDF).

2

Remove the battery pack, wait for about one minute, re-
insert the battery pack, then turn on the power.

3

Reset the settings (page 55).

4

Consult your Sony dealer or local authorized Sony service 
facility.

Battery pack and power