Ecosoft FPC1054CT - Инструкция по эксплуатации - Страница 9

9

INSTRUCTION MANUAL ECOSOFT

®

 MEDIA SYSTEMS

Filter media

 removes impurities from water. Rate of removal depends on the flow rate of 

water  going  through  the  bed  of  media.  Efficient  purification  requires  that  the  flow  rate  is 
within specified range (not too high or too low). Recommended range of flow rates per each 
type of filter is listed in specifications in the end of this manual.

3. INSTALLATION

•  Installation area must meet all relevant building code. Water and power supply, and 

ambient conditions must meet Specification requirements of this manual.

•  Observe all local plumbing and electrical code when connecting system to utilities

•  Install check valve when connecting the filter to water mains. Install second check valve 
after the system to prevent back flow.

•  Particles such as sand, scale or rust can damage the control valve. Install a point-of-

entry sediment filter.

•  Equip the system with sampling taps and pressure gauges as shown on drawings. It will 
help in case any maintenance or troubleshooting is necessary.

•  Install a vacuum relief valve as shown if there is a booster pump downstream of Ecosoft 

filters. The FRP tanks may implode if subjected to negative pressure.

•  If your system does not include bypass valve assembly, run a bypass pipeline along the 
entire system. This may be necessary for diagnostics and maintenance.