Imetec Bellissima MY PRO Ceramic 11665 - Инструкция по эксплуатации - Страница 16

14

EN

Air flow button (2C)  

Temperature button (2B)

0 = OFF    

1 = low temperature

1 = medium air flow   

2 = medium temperature

2 = strong air flow    

3 = high temperature

Cold air shot button (2A)
If the appliance is equipped with this button, it can be used to set the 

styling.
•  If this button is pressed while the appliance is on, the hot air cools 

down and the set style lasts longer.

•  Once the button is released, the appliance returns to a hot air flow 

at the selected level.

on.

MAINTENANCE AND CLEANING

WARNING!  Always  disconnect 

the  appliance  from  the  socket  

before  cleaning  or  performing 

maintenance.
WARNING! Make sure all cleaned parts 

are completely dry before reusing the 

appliance.

Cleaning the appliance and accessories

Clean  the  appliance  and  the  accessories  (diffuser,  nozzle)  with  a 

damp  cloth  when  needed.  Do  not  use  solvents  or  other  aggressive 

or  abrasive  detergents.  Otherwise,  the  surface  could  be  damaged. 

Check the intake opening of the appliance regularly and remove all 

hair and dust.
Cleaning the intake filter (1)

If the appliance is provided with an intake filter, clean it as follows:

•  Open the filter cap (1B) as shown in the figure.

•  Wipe the front and rear of the retina (1A) and the filter cap (1B) with 

a damp cloth.

•  Let the parts dry well and put them back on in inverse order.

NOTE:  the  more  dust  is  present  in  the  place  where  the 

hair dryer is used, the more often the filter must be cleaned.

STORAGE

WARNING!  Risk  of  fire.  Wait  for  the 

appliance  to  cool  completely  before 

storing it.