If You Don’t Have a CD-ROM Drive - Brother FAX 2750 ч.4 - Инструкция по эксплуатации - Страница 23

136

A P P E N D I X A

Before You Install the Optional
Multi-Function Link Pro Software

Installation instructions will be included with PCI-2CD. However, it is
important that you hook up your fax machine to your computer before you
install the software.

If You Don’t Have a CD-ROM Drive

All optional software is supplied on CD-ROM. If you need a Floppy
Diskette version, you can order it from Brother. (Only Multi-Function Link
Pro and Visioneer PaperPort™ LE are available on Floppy Disks, item
numbers PCI2D31 (for Windows

®

 3.1 or 3.11) and PCI2D95 (for Windows

®

95, 98). If you are using Windows NT

®

 Workstation Version 4.0, the

software is not available on Floppy Disks.) You must tell the Brother
Representative the version of Windows

®

 you are using and your fax machine

model number. At the same time, we recommend you order the shielded
IEEE 1284 Bi-directional Cable (UG4558001). To order, call Brother at
1-888-879-3232 (USA) or 1-800-668-2768 (from within Canada).

Computer Requirements

The following are the minimum computer requirements you need to set up
and operate the fax machine as a printer. Use only a shielded interface cable
that is IEEE-1284 compliant, and that is less than 6.0 feet (1.8 meters) long.

CPU

80486/66MHz or higher (Windows

®

 3.1, 3.11 or 95, 98)

Pentium 75 or Higher (Windows NT

®

 Workstation

Version 4.0)

RAM

8MB or greater for Windows

®

 3.1 or 3.11

8MB or greater for Windows

®

 95, 98 (16MB

recommended)
16MB or greater for Windows NT

®

 Workstation

Version 4.0 (32MB recommended)

Hard Disk Drive

50MB Available Disk Space CD-ROM1

Operating System

Windows

®

 3.1, 3.11, 95, 98 or NT

®

 Workstation Version

4.0, with your Windows

®

 version