Эпиляторы Beurer HL 70 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
15
• When used on wet skin, it is important that the skin is sufficiently damp so that the device
can glide optimally over the skin. Epilating is easiest after a shower or bath.
• Do not use any cream before epilating.
• Epilation is easier and more comfortable if the hairs are at the optimal length of 2-5 mm.
If the hairs are longer, we recommend that you first shave the area and after 1-2 weeks
epilate the shorter regrowth.
• Thoroughly clean the epilator attachment before epilating. This reduces the risk of infection as
much as possible.
• Press the on/off button to switch on the device.
• Press the button again to increase the speed.
• The “Epilight” function ensures optimal lighting conditions so that you can see and remove
even the finest hairs.
• Hold the skin taught with your free hand to help lift the hairs.
• Move the device slowly, steadily and without pressure over the skin, with the “Epilight” side
pointed against the direction of hair growth. Make sure you hold the device vertically at a 90°
angle to the skin. As hair doesn‘t always grow in one direction, it can be useful to move the de-
vice in various directions over the skin to achieve an optimal result.
• Be aware that the underarm and bikini areas may be particularly sensitive to pain at first. We
therefore recommend that you use the lowest speed setting for the first use. The pain will les-
sen with repeated use. As skin in this area is particularly sensitive after epilation, do not use
any substances that might irritate the skin such as alcohol-based deodorant.
Changing the attachment:
• To replace an attachment, press the unlock button and take the epilator
attachment off the device.
• Place the corresponding attachment back on the device, ensuring that
it clicks into place.
• Can only be attached in one direction.
• To change the shaver or exfoliation attachment, remove the attachment
from the attachment holder and then reinsert the attachment you wish
to use.
Note
We recommend that you use the shaver attachment on the second speed setting to achieve op-
timum results.
5. Care and storage
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter
into the device or accessories.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
