Электросамокаты Segway-Ninebot MAX G2 E - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Hub motor
To accelerate and decelerate, check if
the hub motor is stalled or has
abnormal sounds.
Front wheel
maintenance
Check if the front wheel is stalled or gets
shaky, or the axis shaft is unbalanced.
Brake
adjustment
If the brake is too tight/loose, use the 4
mm Allen key to loosen the screw on the
caliper. Then slightly adjust the brake
line (decrease/increase the exposed
length), and tighten the screw again.
Test standard: the riding speed is 20
km/h (12.4 mph), and the braking
distance is within 6m
Drum brake
Front wheel can rotate normally without
abnormal sound. Front wheel can be
braked after squeezing the brake lever.
Taillight
Squeeze the brake lever, the tail light
works normally.
Headlight
Check the headlight and see if it lights
brightly.
Direction
indicators
Toggle the direction indicator button to
the left/right respectively, check if the
direction indicators on the left/right
side flash normally.
Dashboard
Power on the scooter, the dashboard
works properly.
Horn
Press the horn button and the sound is
loud.
Throttle
Press and hold the throttle then release
it, checking for acceleration and
deceleration.
Note: Release it, check if the throttle will
back to the position.
Item
Component
Function
inspection
Maintenance Method
Every 6
months or
every 500
km (310
miles)
Every 1 year or
every 1000
km (621
miles)
Every 3 years
or
every 10,000
km (6,214
miles)
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Every 3
months
Fault
detection
After connecting with the Segway-Ninebot
app:
1) Update the firmware to the latest
version.
2) Check if the notification of the
corresponding error code and
possible causes will prompt when the
scooter detects an error
Charging
Charge the scooter:
1) Check if the current battery power
displays on the dashboard.
2) Check the LED indicator on the battery
charger.
Charging: red, Fully charged: green.
Control
buttons
Press or toggle the button 3 times without
failure.
Turning
Test with left turns and right turns (the
steering angle is 60). No resistance or lag
when turning.
Battery
assembly
The battery need to be replaced when it is
charged and discharged for 500 times or
the total mileage is more than 10,000 km
(6,213 miles).
Note: It is recommended to charge once
every 60 days for long-term storage.
Controller
After 3 years' or 10,000 km's (6,214
miles') riding, the abnormal parts of the
kickscooter have to be repleced
immediately.
Hub motor
Rear wheel
assembly
Throttle &
Brake lever
Front fork
assembly
Folding
mechanism
Drumbrake
Dashboard
Cover
Item
Component
Function
inspection
Important
parts
Functional
parts
Maintenance Method
Every 6
months or
every 500
km (310
miles)
Every 1 year or
every 1000
km (621
miles)
Every 3 years
or
every 10,000
km (6,214
miles)
√
√
√
√
√
√
√
√
√
√
√
√
Every 3
months
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
