Segway-Ninebot E10 - Инструкция по эксплуатации - Страница 4

WARNING

3. Assembly 

Please familiarize yourself with each part. The pictures shown are for illustration purpose only. Actual product may vary. 

2. Parts and Functions

03

04

Power button

Press the button to power on or change riding modes. The Turbo mode is set as default when turned on. Hold for 2s to power off.

Slide the stem in to the marked length.

2

Slightly loosen the bolts on the collar clamp.

1

Park with the kickstand. Step on the footboard, hold 

the handlebar and push forward to unfold the scooter.

3

4

Turbo mode 

Mode indicator
Ambient light (for E10 and E12 only)

blink slowly, with 2 beeps

blue breathing

red breathing

full-color breathing

blink fast, with 3 beeps

solid, with 1 beep

Max. speed

E8
E10
E12

8.7 mph (14 km/h)

10 mph (16 km/h)

10 mph (16 km/h)

11.2 mph (18 km/h)

11.2 mph (18 km/h)

6.2 mph (10 km/h)
6.2 mph (10 km/h)
6.2 mph (10 km/h)

8.7 mph (14 km/h)

 Cruise mode 

  Safe mode

Battery indicator

The color indicates the battery level: ≥50% green, 20%–50% yellow, ≤20% red.

*

When an abnormality occurs, both the battery and mode indicators will flash and an alarm will start beeping.

Brake lever

Stem  

Spring damper

Power button

Footboard

Hub motor

Battery indicator

Throttle

Folding pedal

Folding hook

Accessories   

Collar clamp

Fender brake

Kickstand

Charge port

Reflector

Mode indicator 

Handlebar

5 mm Allen 

wrench

Limited 

Warranty

Battery charger

When not properly tightened, the handlebar will 

rotate out of alignment and cause accidents.

CAUTION

Power off the scooter before assembling. The brake 

cable should not wrap around the stem.

CLICK

Tighten the bolts on the collar clamp. 
Torque: about 8.9 ft-lb (12.0 ± 1.0 N•m)