Bort BFB-900X - Инструкция по эксплуатации - Страница 7

7

•  If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected sup-

ply . Use of an RCD reduces the risk of electric shock .

Personal safety

•  Stay alert, watch what you are doing and use common 

sense when operating a power tool . Do not use a power 

tool while you are tired or under the influence of drugs, 

alcohol or medication . A moment of inattention while 

operating power tools may result in serious personal 

injury .

•  Use personal protective equipment . Always wear eye 

protection . Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce personal 

injuries .

•  Prevent unintentional starting . Ensure the switch is in 

the off-position before connecting to power source and/

or battery pack, picking up or carrying the tool . Carrying 

power tools with your finger on the switch or energising 

power tools that have the switch on invites accidents .

•  Remove any adjusting key or wrench before turning the 

power tool on . A wrench or a key left attached to a rotat-

ing part of the power tool may result in personal injury .

•  Do not overreach . Keep proper footing and balance at 

all times . This enables better control of the power tool in 

unexpected situations .

•  Dress properly . Do not wear loose clothing or jewellery . 

Keep your hair, clothing and gloves away from mov-

ing parts . Loose clothes, jewellery or long hair can be 

caught in moving parts .

•  If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected 

and properly used . Use of dust collection can reduce 

dust-related hazards .

Power tool use and care

•  Do not force the power tool . Use the correct power 

tool for your application . The correct power tool will 

do the job better and safer at the rate for which it was 

designed .

•  Do not use the power tool if the switch does not turn 

it on and off . Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired .

•  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power 

tools . Such preventive safety measures reduce the risk of 

starting the power tool accidentally .

•  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 

or these instructions to operate the power tool . Power 

tools are dangerous in the hands of untrained users .

•  Maintain power tools . Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation . 

If damaged, have the power tool repaired before use . 

Many accidents are caused by poorly maintained power 

tools .

•  Keep cutting tools sharp and clean . Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control .

•  Use the power tool, accessories and tool bits etc . in 

accordance with these instructions, taking into account 

the working conditions and the work to be performed . 

Use of the power tool for operations different from 

those intended could result in a hazardous situation .

Service

Have your power tool serviced by a qualified repair person 

using only identical replacement parts . This will ensure 

that the safety of the power tool is maintained .

PLANER SAFETY RULES

•  Wait for the cutter to stop before setting the tool down . 

An exposed rotating cutter may engage the surface 

leading to possible loss of control and serious injury .

•  Hold the power tool by insulated gripping surfaces only, 

because the cutter may contact its own cord . Cutting a 

“live” wire may make exposed metal parts of the power 

tool “live” and could give the operator an electric shock .

•  Use clamps or another practical way to secure and sup-

port the workpiece to a stable platform . Holding the 

work by your hand or against the body leaves it unstable 

and may lead to loss of control .

•  Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 

for assistance . Contact with electric lines can lead to 

fire and electric shock . Damaging a gas line can lead 

to explosion . Penetrating a water line causes property 

damage or may cause an electric shock .

•  Do not reach into the saw dust ejector with your hands . 

They could be injured by rotating parts .

•  Apply the machine to the workpiece only when 

switched on . Otherwise there is danger of kickback 

when the cutting tool jams in the workpiece .

•  When working, always hold the planer in such a manner 

that the planer base plate faces flat on the workpiece . 

Otherwise the planer can become wedged and lead to 

injuries .

•  Never plane over metal objects, nails or screws . The 

planer blade and the blade shaft can become damaged 

and lead to increased vibrations .

MAINTENANCE AND CLEANING

Make sure that the machine is not live when carry-

ing out maintenance work on the motor .

•  Regularly clean the machine housing with a soft cloth, 

preferably after each use . Keep the ventilation slots free 

from dust and dirt .If the dirt does not come off use a soft 

cloth moistened with soapy water . Never use solvents 

such as petrol, alcohol, ammonia water, etc . These sol-

vents may damage the plastic parts .

•  The machine requires no additional lubrication .

•  Should a fault occur, e .g . after wear of a part, please 

contact your local BORT GLOBAL LIMITED dealer .

DISPOSAL

Discarded electric appliances are recyclable and 

should not be discarded in the domestic waste!