Ryobi RCS2340B 5133004340 - Инструкция по эксплуатации - Страница 5

3

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

damage or stress.

■

Never pick up or carry the product by the electric cable.

■

Never pull the power cord to disconnect from the power 
supply.

■

Keep the power cord away from heat, oil, and sharp 
edges.

■

Before every use, examine the supply  cord for damage. 
If there are signs of damage, it must be replaced by 
a qualified person at an authorised service centre to 
avoid a hazard.

CHAINSAW SAFETY WARNINGS

■

Keep all parts of the body away from the saw 
chain when operating the product. Before you 
start the chainsaw, make sure the saw chain is not 
contacting anything.

 A moment of inattention while 

operating chainsaws may cause entanglement of your 
clothing or body with the saw chain.

■

Always hold the chainsaw with your right hand 
on the rear handle and your left hand on the front 
handle.

 Holding the chainsaw with a reversed hand 

configuration increases the risk of personal injury and 
should never be done.

■

Hold the power tool by the insulated gripping 
surface only, because the saw chain may contact 
hidden wiring or its own cord. 

 Saw chains contacting 

a “live” wire may make exposed metal parts of the 
power tool “live” and could give the operator an electric 
shock.

■

Wear safety glasses and hearing protection. Further 
protective equipment for head, hands, legs and feet 
is recommended.

 Adequate protective clothing will 

reduce personal injury by flying debris or accidental 
contact with the saw chain.

■

Do not operate a chainsaw in a tree.

 Operation of 

a chainsaw while up in a tree may result in personal 
injury.

■

Always keep proper footing and operate the 
chainsaw only when standing on fixed, secure and 
level surface.

 Slippery or unstable surfaces such as 

ladders may cause a loss of balance or control of the 
chainsaw.

■

When cutting a limb that is under tension be alert 
for spring back.

 When the tension in the wood fibres is 

released the spring loaded limb may strike the operator 
and/or throw the chainsaw out of control.

■

Use extreme caution when cutting brush and 
saplings.

 The slender material may catch the saw 

chain and be whipped toward you or pull you off 
balance.

■

Carry the chainsaw by the front handle with the 
chainsaw switched off and away from your body. 
When transporting or storing the chainsaw always 
fit the guide bar cover.

 Proper handling of the 

chainsaw will reduce the likelihood of accidental contact 
with the moving saw chain.

■

Follow instructions for lubricating, chain tensioning 
and changing accessories.

 Improperly tensioned 

or lubricated chain may either break or increase the 

chance for kickback.

■

Keep handles dry, clean, and free from oil and 
grease.

 Greasy, oily handles are slippery causing loss 

of control.

■

Cut wood only. Do not use chainsaw for purposes 
not intended. For example: do not use chainsaw 
for cutting plastic, masonry or non-wood building 
materials.

 Use of the chainsaw for operations different 

than intended could result in a hazardous situation.

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the guide bar 
touches an object, or when the wood closes in and pinches 
the saw chain in the cut.
Tip contact in some cases may cause a sudden reverse 
reaction, kicking the guide bar up and back towards the 
operator.
Pinching the saw chain along the top of the guide bar may 
push the guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of 
the saw which could result in serious personal injury. Do 
not rely exclusively upon the safety devices built into your 
saw. As a chainsaw user, you should take several steps to 
keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incorrect 
operating procedures or conditions and can be avoided by 
taking proper precautions as given below:

■

Maintain a firm grip, with thumbs and fingers 
encircling the chainsaw handles, with both hands 
on the saw and position your body and arm to allow 
you to resist kickback forces.

 Kickback forces can 

be controlled by the operator, if proper precautions are 
taken. Do not let go of the chainsaw.

■

Do not overreach and do not cut above shoulder 
height. 

This helps prevent unintended tip contact and 

enables better control of the chainsaw in unexpected 
situations.

■

Only use replacement bars and chains specified 
by the manufacturer.

 Incorrect replacement bars and 

chains may cause chain breakage and/or kickback.

■

Follow the manufacturer’s sharpening and 
maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead to 
increased kickback.

ADDITIONAL CHAINSAW SAFETY WARNINGS

■

It is recommended to cut logs on a saw-horse or cradle 
when operating the product the first time.

■

Ensure all guards, handles and spiked bumper are 
properly fitted and are in good condition.

■

Persons using the product should be in good health. 
The product is heavy, so the operator must be 
physically fit. The operator should be alert, have a good 
vision, mobility, balance, and manual dexterity. If there 
is any doubt, do not operate the product.

■

Do not start using the product until you have a clear 
work area, secure footing, and a planned retreat path 
away from the falling tree.

■

Beware of the emission of lubricant mist and saw dust. 
Wear a mask or respirator, if required.