Ryobi RCS2340B 5133004340 - Инструкция по эксплуатации - Страница 4

2

| English

from moving parts.

 Loose clothes, jewellery or long 

hair can be caught in moving parts.

■

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

POWER TOOL USE AND CARE

■

Do not force the power tool. Use the correct power 
tool for your application.

 The correct power tool will 

do the job better and safer at the rate for which it was 
designed.

■

Do not use the power tool if the switch does not turn 
it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

■

Disconnect the plug from the power source and/or 
the battery pack from the power tool before making 
any adjustments, changing accessories or storing 
power tools.

 Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

■

Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the power 
tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained 
users.

■

Maintain power tools. Check for misalignment or 
binding of moving parts, breakage of parts and any 
other condition that may affect the power tool’s 
operation. If damaged, have the power tool repaired 
before use. 

Many accidents are caused by poorly 

maintained power tools.

■

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are 
less likely to bind and are easier to control.

■

Use the power tool, accessories and tool bits etc, 
in accordance with these instructions, taking into 
account the working conditions and the work to 
be performed.

 Use of the power tool for operations 

different from those intended could result in a 
hazardous situation.

■

Keep handles and grasping surfaces dry, clean 
and free from oil and grease.

 Slippery handles and 

grasping surfaces do not allow for safe handling and 
control of the tool in unexpected situations.

SERVICE

■

Have your power tool serviced by a qualified repair 
person using only identical replacement parts.

This will ensure that the safety of the power tool is 
maintained.

ADDITIONAL GENERAL SAFETY WARNINGS

■

Some regions have regulations that restrict the use of 
the product. Check with your local authority for advice.

■

Never allow children or people unfamiliar with the 
instructions to use the product. Local regulations may 
restrict the age of the operator.

■

Ensure before each use that all controls and safety 
devices function correctly. Do not use the power tool if 
the “off” switch does not stop the motor.

■

Wear full eye and hearing protection, strong sturdy 
gloves, as well as head protection while operating the 
product. Use a face mask if operation is dusty.

■

Do not wear loose fitting clothing, short trousers, or 
jewellery of any kind.

■

Secure long hair so it is above shoulder level to prevent 
entanglement in moving parts.

■

Beware of thrown, flying, or falling objects. Keep all 
bystanders, children, and animals at least 15 m away 
from work area.

■

Do not operate in poor lighting. The operator requires a 
clear view of the work area to identify potential hazards.

■

Use of hearing protection reduces the ability to hear 
warnings (shouts or alarms). The operator must pay 
extra attention to what is going on in the working area.

■

Operating similar tools nearby increases both the risk 
of hearing injury and the potential for other persons to 
enter your working area.

■

Keep firm footing and balance. Do not overreach. 
Overreaching can result in loss of balance and can 
increase the risk of kickback.

■

Keep all parts of your body away from any moving part.

■

Inspect the product before each use. Check for correct 
operation of all controls, including the chain brake. 
Check for loose fasteners, make sure all guards, and 
handles are properly and securely attached. Replace 
any damaged parts before use.

■

Do not modify the product in any way or use parts 
and accessories which are not recommended by the 
manufacturer.

■

A power spike causes voltage fluctuations and may 
affect other electrical products in the same power 
line. Connect the product to a power supply with an 
impedance equal or less than 0.33 

Ω

 to minimize 

voltage fluctuations. Contact your electric power 
supplier for further clarific

ation.

 WARNING

If the product is dropped, suffers heavy impact or begins 
to vibrate abnormally, immediately stop the product and 
inspect for damage or identify the cause of the vibration. 
Any damage should be properly repaired or replaced by 
an authorised service centre.

■

Electrical power should be supplied via a residual 
current device (RCD) with a tripping current of not more 
than 30 mA.

■

If you need to use an extension cable, ensure it is 
suitable for outdoor use and has a current capacity 
sufficient to supply your product. Check it before every 
use for damage. Always uncoil it during use because 
coiled cables can overheat. Damaged extension cables 
should not be repaired; they should be replaced with an 
equivalent type.

■

If the power cable becomes damaged, it must be 
replaced before using.

■

Make sure the power cord is positioned so that it 
cannot be damaged by the cutting means and will not 
be stepped on, tripped over, or otherwise subjected to