Makita DUC302Z - Инструкция по эксплуатации - Страница 6

6 

Vibration emission (a

h

) : 4.2 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

 
 
For Model BUC122 

ENG101-2 

For European countries only

Noise

The typical A-weighted noise level determined according 
to EN60745-2-13: 

Sound pressure level (L

pA

) : 84.6 dB(A) 

Uncertainty (K) : 2 dB(A) 

The noise level under working may exceed 85 dB (A). 

Wear ear protection. 

ENG221-1 

Vibration 

The vibration total value (tri-axial vector sum) 
determined according to EN60745-2-13: 

Work mode : cutting wood 
Vibration emission (a

h

) : 4.3 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

ENH016-5 

EC-DECLARATION OF CONFORMITY 

The undersigned, Kato, as authorized by, declare that 
the MAKITA machines, 

EU model identification No.:M6 08 02 24243 083

BUC121 
complies with the standard safety and health 
requirements of the pertinent EU guidelines: 
EU machinery guideline 98/37/EC, Noise emission 
2000/14/EG, EU EMC guideline. 
The requirements of the above EU guidelines were 
implemented chiefly on the basis of the following 
standards: EN60745-2-13, EN 55014, ENISO11681. 
The conformity assessment procedure 2000/14/EG was 
performed per Annex V. The measured sound power 
level (Lwa) is 92.0 dB(A). The guaranteed sound power 
level (Ld) is 94 dB(A). The EU Type-Examination per 
98/37/EG was performed by: TÜV Product Service 
GmbH, Zertifizierungsstelle, Ridlerstraße 31, D-80339 
München. 

Tomoyasu Kato 

CE2007

000230 

Director 

Responsible Manufacturer: 

Makita Corporation

3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN 
Authorized Representative in Europe: 

Makita International Europe Ltd.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 
8JD, ENGLAND 

ENH016-5 

EC-DECLARATION OF CONFORMITY 

The undersigned, Kato, as authorized by, declare that 
the MAKITA machines, 

EU model identification No.:M6 08 02 24243 083

BUC122 
complies with the standard safety and health 
requirements of the pertinent EU guidelines: 
EU machinery guideline 98/37/EC, Noise emission 
2000/14/EG, EU EMC guideline. 
The requirements of the above EU guidelines were 
implemented chiefly on the basis of the following 
standards: EN60745-2-13, EN 55014, ENISO11681. 
The conformity assessment procedure 2000/14/EG was 
performed per Annex V. The measured sound power 
level (Lwa) is 92.7 dB(A). The guaranteed sound power 
level (Ld) is 95 dB(A). The EU Type-Examination per 
98/37/EG was performed by: TÜV Product Service 
GmbH, Zertifizierungsstelle, Ridlerstraße 31, D-80339 
München. 

Tomoyasu Kato 

CE2007

000230 

Director 

Responsible Manufacturer: 

Makita Corporation

3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN 
Authorized Representative in Europe: 

Makita International Europe Ltd.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 
8JD, ENGLAND 

GEB037-1 

Chain saw safety warnings: 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to chain saw safety rules. If you use this tool 
unsafely or incorrectly, you can suffer serious 
personal injury. 

1. 

Keep all parts of the body away from the saw 
chain when the chain saw is operating. Before 
you start the chain saw, make sure the saw 
chain is not contacting anything.

 A moment of 

inattention while operating chain saws may cause 
entanglement of your clothing or body with the 
saw chain.   

2. 

Always hold the chain saw with your right 
hand on the rear handle and your left hand on 
the front handle.

 Holding the chain saw with a 

reversed hand configuration increases the risk of 
personal injury and should never be done.   

3. 

Wear safety glasses and hearing protection. 
Further protective equipment for head, hands, 
legs and feet is recommended.

 Adequate 

protective clothing will reduce personal injury by 
flying debris or accidental contact with the saw 
chain.