Greenworks G40CS30 20117 - Инструкция по эксплуатации - Страница 17

14

English

EN

FR

DE

ES

IT

PT

NL

SV

DA

NO

FI

HU

CS

RU

RO

PL

SL

HR

ET

LT

LV

SK

BG



Carry the chain saw by the front handle with the 
chain saw switched off and away from your body.

When transporting or storing the chain saw, always fit 
the guide bar cover. Proper handling of the chain saw 
will reduce the likelihood of accidental contact with the 
moving saw chain.



Follow instructions for lubricating, chain 
tensioning and changing accessories.

 Improperly 

tensioned or lubricated chain may either break or 
increase the chance for kickback.



Keep handles dry, clean, and free from oil and 
grease. Greasy,

 oily handles are slippery, causing 

loss of control.



Cut wood only. Do not use chain saw for purposes 
not intended. For example: do not use chain saw 
for cutting plastic, masonry or non-wood building 
materials.

 Use of the chain saw for operations other 

than intended could result in a hazardous situation.

CAUSES AND OPERATOR PREVENTION OF 
KICKBACK:

Kickback may occur when the nose or tip of the guide 
bar touches an object, or when the wood closes in and 
pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden reverse 
reaction, kicking the guide bar up and back towards the 
operator.
Pinching the saw chain along the top of the guide bar may 
push the guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of 
the saw which could result in serious personal injury. Do 
not rely exclusively upon the safety devices built into your 
saw. As a chain saw user, you should take several steps 
to keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incorrect 
operating procedures or conditions and can be avoided by 
taking proper precautions as given below:



Maintain a firm grip, with thumbs and fingers encircling 
the chain saw handles, with both hands on the saw 
and your body and arm positioned to allow you to 
resist kickback forces.



Kickback forces can be controlled by the operator, 
if proper precautions are taken. Do not let go of the 
chain saw.



Do not overreach and do not cut above shoulder 
height. This helps prevent unintended tip contact and 
enables better control of the chain saw in unexpected 
situations.



Only use replacement bars and chains specified by 
the manufacturer. Incorrect replacement bars and 
chains may cause chain breakage and/or kickback.



Follow the manufacturer’s sharpening and 

maintenance instructions for the saw chain. 
Decreasing the depth gauge height can lead to 
increased kickback.

ADDITIONAL WARNINGS



It has been reported that vibrations from hand-held 
tools may contribute to a condition called Raynaud’s 
Syndrome in certain individuals. Symptoms may 
include tingling, numbness and blanching of the 

fi

 ngers, usually apparent upon exposure to cold. 

Hereditary factors, exposure to cold and dampness, 
diet, smoking and work practices are all thought to 
contribute to the development of these symptoms. It 
is presently unknown what, if any, vibrations or extent 
of exposure may contribute to the condition. There 
are measures that can be taken by the operator to 
possibly reduce the effects of vibration:

●

Keep your body warm in cold weather. When 
operating the unit wear gloves to keep the hands 
and wrists warm. It is reported that cold weather 
is a major factor contributing to Raynaud’s 
Syndrome.

●

After each period of operation, exercise to increase 
blood circulation.

●

Take frequent work breaks. Limit the amount of 
exposure per day.

If you experience any of the symptoms of this condition, 
immediately discontinue use and see your physician about 
these symptoms.



The recommended cutting capacity of this chain saw 
is 153mm (6 in.) and smaller to prolong the life of the 
tool and allow for safest operation. Cutting logs with 
a diameter larger than this will cause excess wear on 
your tool. Logs with a maximum diameter of 229mm 
(9in.) can be cut, but should only be done so rarely 
and with caution.



The integral spiked bumper is designed to assist 
cutting. When forced against the log while cutting it 
provides a more stable pivot point.



Any chainsaw is potentially lethal if used 
inappropriately. It is strongly suggested that you seek 
professional training in the safety and use of this tool.

SAVE THESE INSTRUCTIONS. REFER TO THEM 
FREQUENTLY AND USE THEM TO INSTRUCT OTHERS 
WHO MAY USE THIS UNIT. IF YOU LOAN SOMEONE 
THIS UNIT, LOAN THEM THESE INSTRUCTIONS ALSO.

RCS36-23lgs manual(30Dec 2010).indd   14

RCS36-23lgs manual(30Dec 2010).indd   14

2010/12/30     4:16

2010/12/30     4:16