Bosch AHS 65 34 - Инструкция по эксплуатации - Страница 10

10

 | English 

F 016 L81 423 | (9.11.15)

Bosch Power Tools



Do not abuse the cord. Never use the cord for carrying, 
pulling or unplugging the power tool. Keep cord away 
from heat, oil, sharp edges and moving parts. 

Damaged 

or entangled cords increase the risk of electric shock.



When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. 

Use of a cord suitable 

for outdoor use reduces the risk of electric shock.



If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected 
supply. 

Use of an RCD reduces the risk of electric shock.

Personal safety



Stay alert, watch what you are doing and use common 
sense when operating a power tool. Do not use a power 
tool while you are tired or under the influence of drugs, 
alcohol or medication. 

A moment of inattention while op-

erating power tools may result in serious personal injury.



Use personal protective equipment. Always wear eye 
protection. 

Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection used 
for appropriate conditions will reduce personal injuries.



Prevent unintentional starting. Ensure the switch is in 
the off-position before connecting to power source 
and/or battery pack, picking up or carrying the tool. 

Car-

rying power tools with your finger on the switch or energis-
ing power tools that have the switch on invites accidents.



Remove any adjusting key or wrench before turning 
the power tool on. 

A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.



Do not overreach. Keep proper footing and balance at 
all times. 

This enables better control of the power tool in 

unexpected situations.



Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from 
moving parts. 

Loose clothes, jewellery or long hair can be 

caught in moving parts.



If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. 

Use of dust collection can re-

duce dust-related hazards.

Power tool use and care



Do not force the power tool. Use the correct power tool 
for your application. 

The correct power tool will do the 

job better and safer at the rate for which it was designed.



Do not use the power tool if the switch does not turn it 
on and off. 

Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.



Disconnect the plug from the power source and/or the 
battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.



Store idle power tools out of the reach of children and 
do not allow persons unfamiliar with the power tool or 
these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.



Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other 
condition that may affect the power tool’s operation. If 
damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 
tools.



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account 
the working conditions and the work to be performed. 

Use of the power tool for operations different from those 
intended could result in a hazardous situation.

Service



Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Hedge trimmer safety warnings



Keep all parts of the body away from the cutter blade. 
Do not remove cut material or hold material to be cut 
when blades are moving. Make sure the switch is off 
when clearing jammed material. 

A moment of inatten-

tion while operating the hedge trimmer may result in seri-
ous personal injury.



Carry the hedge trimmer by the handle with the cutter 
blade stopped. When transporting or storing the hedge 
trimmer always fit the cutting device cover. 

Proper han-

dling of the hedge trimmer will reduce possible personal 
injury from the cutter blades.



Hold the power tool by insulated gripping surfaces on-
ly, because the cutter blade may contact hidden wiring 
or its own cord. 

Cutter blades contacting a “live” wire may 

make exposed metal parts of the power “live” and could 
give the operator an electric shock.



Keep cable away from cutting area. 

During operation the 

cable may be hidden in shrubs and can be accidentally cut 
by the blade.

Additional safety warnings



This tool is not intended for use by persons (including chil-
dren) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they 
have been given supervision or instruction concerning use 
of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not 
play with the appliance.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Wait until the machine has come to a standstill before 
placing it down. 



Other persons and animals should remain at a distance of 
3 metres or more when the machine is being used. The op-
erator is responsible for third persons in the working area.



Never grasp the blade of the hedgecutter.

OBJ_BUCH-1549-005.book  Page 10  Monday, November 9, 2015  11:06 AM