Электропилы AL-KO HT 550 SAFETY CUT - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Translation of original user instructions
18
AL-KO Hedge trimmer
Maintenance and care
Caution - Danger of electrocution!
Always disconnect the mains plug when carrying
out maintenance or repair work!
Caution - Risk of injury!
Always wear working gloves when carrying out
maintenance or repair work.
1. After each use, clean the cutting blades and
the housing with a brush or cloth. Do not use
water and/or aggressive cleaning agents - risk of
corrosion.
2. Lightly oil the cutting bar with a suitable protective
lubricant.
3. Check that all screws are firmly seated.
4. Regularly check the cutting blades for damage.
If the cutting blades show damage or excessive
wear, please contact the nearest AL-KO service
centre.
Storage
The protective cover can be wall-mounted and
used as a bracket for holding the hedge trimmer.
Make sure it is firmly attached! (
7
)
Always disconnect the mains plug when storing
the machine
Always store the machine with the protective cover
attached
Store the equipment in an area which is kept dry,
and which cannot be accessed by children or un-
authorised persons
Secure the trimmer with a padlock* (
6
)
* Not included
Disposal
Do not dispose of old equipment, batteries
or accumulators as household waste!
The trimmer, packaging, and accessories were made
with recyclable materials, and should be disposed of
accordingly.
Faults and remedies
Fault
Possible cause
Solution
Machine does not work
Power supply absent
Check the domestic fuse / extension cable
Power cable faulty
Contact an AL-KO service centre
Machine works intermit-
tently
Extension cable damaged
Check the extension cable
On/Off switch faulty
Contact an AL-KO service centre
Internal fault
Contact an AL-KO service centre
Motor runs but blades do
not move
Internal fault
Contact an AL-KO service centre
The blades become hot
Insufficient lubrication
Lighly oil the blades
Blades are blunt
Contact an AL-KO service centre
Notching on the blades
Contact an AL-KO service centre
For faults not listed in this table, or which you cannot resolve by yourself, please contact our customer
service.
