Электропилы AL-KO HT 550 SAFETY CUT - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Translation of original user instructions
14
AL-KO Hedge trimmer
Technical data
Technical data
HT 440 Basic Cut
HT 550 Safety Cut
Power consumption
440 W
550 W
Cutter length
440 mm
520 mm
Cutting thickness
16 mm
18 mm
Total weight
3,2 kg
3,6 kg
Vibrations measured at handle*
2,2 m/s² (K = 1,5 m/s²)
2,9 m/s² (K = 1,5 m/s²)
Mains voltage
230V~240V / 50Hz
230V~240V / 50Hz
Insulation class
/ II
/ II
No-load stroke rate
1600 m
-1
1600 m
-1
Sound pressure level L
PA
86 dB (A) (K = 1,5 dB (A))
86 dB(A) (K = 1,5 dB (A))
* The declared vibration total value has been measured in accordance with a standard test method and may be
used for comparing one tool with another. The declared vibration total value may also be used in a preliminary
assessment of exposure.
Safety instructions
General Power Tool Safety Warnings
Warning!
The vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the tool is used.
Of the need to identify safety measures to protect
the operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Caution!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Caution - Risk of injury!
Safety/protection devices should not be disabled!
Caution - Danger of electrocution!
If the cable has been cut or is damaged, discon-
nect the plug from the mains supply immediately.
Caution!
Use the equipment only if it is in correct operating
condition! Before using, check the machine, cable
and plug for damage; any damaged parts must be
repaired or replaced at a specialised repair centre.
