Philips BRI956 - Инструкция по эксплуатации - Страница 29

Problem

Possible cause

Solution

The ready to flash light 
does not light up white.

The device is not completely 
in contact with your skin.

Place the device at a 90 degree angle 
on the skin so that the integrated safety 
system in in contact with your skin.

The device produces a 
strange smell.

The light exit window or the 
skin tone sensor is dirty.

Clean the light exit window and the skin 
tone sensor carefully.

You have not removed 
the hairs on the area to be 
treated properly. These hairs 
may get burned and can 
cause the smell.

Pretreat your skin before you use Lumea.

The device doesn’t flash, 
the fan is not switched on 
and all 5 intensity lights 
blink.

The attachment is not 
attached properly.

Make sure you attach the attachment 
completely. If necessary clean the 
electronic contacts on the attachment.

The skin feels more 
sensitive than usual during 
treatment. I experience 
discomfort when I use the 
device.

The light intensity setting you 
use is too high.

Check if you have selected the right light 
intensity setting. If necessary, select a 
lower setting.

You did not remove the hairs 
on the areas to be treated.

Pretreat your skin before you use Lumea.

The UV filter of the light exit 
window is broken.

If the UV filter is broken, do not use the 
device anymore. Contact the Consumer 
Care Center in your country, your Philips 
dealer or a Philips service center.

You treated an area for which 
the device is not intended.

Never use the device on the following 
areas: inner labia, anus, nipples, 
areolas, lips, moles, freckles, tattoos, 
piercings. inside the nostrils and ears, 
around the eyes and near the eyebrows. 
Men must not use it on the face and neck 
including all beard growing areas and 
whole genital area.

There is no glass filter in my 
attachment.

This is normal.

No action required: there is no filter in the 
body and armpit attachments. Only the 
facial, precision and bikini attachments 
have a specialized filter.

The skin reaction after 
treatment lasts longer than 
usual.

You have used a light 
intensity setting which is too 
high for you.

Select a lower intensity next 
time. See chapter 'Using your Philips 
Lumea', section 'Selecting the right light 
intensity'.

29

English