Philips BRI956 - Инструкция по эксплуатации - Страница 28

BRI959, BRI956, BRI954, BRI953, BRI950

Lithium-ion battery

2 x 3.6 Volt 1000 mAh

Optical exposure

2.4-6.5 J/cm2

Maximum optical energy

4.8 - 23 J

Optical homogeneity

Max. +/- 20% deviation from average optical exposure in 
treatment area

Repetition time

1-3.5 s

Pulse duration

<2.5 ms

Flash interval

Between 1-3.5s depending on battery/mains connected use

Pulse sequence

Single pulse

Optical spectrum

560-1200 nm

Troubleshooting

Problem

Possible cause

Solution

The device/adapter 
becomes warm during use.

It is normal for the device and 
adapter to become warm (but 
not too hot to touch) during 
use. 

Use the device in a slightly cooler 
environment and/ or let it cool down 
before continuing use.

The fan is not working.

Check if the attachment is well 
connected. Clean the connectors on 
the attachment if needed. In case the 
attachment is well connected and it is 
possible to produce flashes with the 
device, contact the Consumer Care 
Center in your  country, your Philips 
dealer or a Philips service center.

The cooling airflow of the 
fan is blocked by hands or a 
towel. 

Make sure the cooling airflow of the fan 
is unblocked.

When I place the device on 
the skin, it does not release 
a flash. The 'ready to flash' 
light blinks orange.

Your skin tone in the area to 
be treated is too dark.

Treat other body areas with lighter skin 
tones with Lumea.

The ready to flash light 
blinks orange and all 5 
intensity lights blink as well.

The device needs to be reset. To reset the device take the plug out 

of the socket, wait for 30 minutes to 
let the device cool down. The device 
should function normally again. In 
case it doesn't work again, contact the 
Consumer Care Center in your country.

28

English