Panasonic ES-LS9A-K820 - Инструкция по эксплуатации - Страница 12

12

English

Preparation

Charging the shaver

 •Turn the shaver off.

 •Wipe off any water droplets on the main body rear 

terminals.

1 

Insert the appliance plug 

into the self-cleaning 

recharger�

2 

Remove the protective cap 

while pressing the side of 

the cap and insert the 

shaver into the self-

cleaning recharger�

 •Slowly insert the shaver into 

the self‑cleaning recharger 

taking care not to damage the 

system outer foil.

3

1

2

3 

Plug the adaptor into a household outlet�

 •Check that the charge status lamp ( ) is glowing.

 •Charging is completed after approx. 1 hour.

4 

Disconnect the adaptor after charging is 

completed�

Quick charge

Even though the battery runs out, you can shave 

once after 3‑minute charge.

(This will differ depending on usage.)

While charging 

After charging is 

completed

 glows.

The number of the battery 

capacity lamp will increase 

as charging progresses.

“100%” appears and then 

turns off after 5 seconds.

Notes

 •

When charging the shaver for the first time or when it 

has not been in use for more than 6 months, the 

charging time may change or the charge status lamp 

( ) may not glow for a few minutes. It will eventually 

glow if kept connected.

 •Recommended ambient temperature for charging is 

10 °C – 35 °C. It may take longer to charge, or the 

charge status lamp ( ) will blink quickly and the 

battery may fail to charge properly in extremely high 

or low temperatures.

 •The shaver can be used for approximately 2 weeks 

with a full charge.  

(Based on one 3‑minute dry‑shave usage per day in 

an ambient temperature range of 20 °C – 30 °C.) 

The number of usable days varies depending on the 

following conditions.

‑ Beard thickness

‑ Pressure applied to the skin

‑ Usage frequency of the sonic vibration cleaning mode