Panasonic ER-131 - Инструкция по эксплуатации - Страница 7

7

Life of the blade and battery 

<Blade life>

1) Although the blade life will vary in

accordance with the frequency
and conditions of use, when used
for five haircuts (each lasting 12
minutes) a day, it should normally
be possible to use the blade for
a p p r o x i m a t e l y   t h r e e   m o n t h s .
However, in order to maintain the
cutting performance of the blade,
i t   i s   i m p o r t a n t   t o   a p p l y   t h e   o i l
before and after each use.

2) If the cutting performance of the

blade deteriorates and cannot be
restored by cleaning or applying
the oil, it indicates that the blade
has exceeded its useful life, and
that it is time to replace it.

<Battery life>

Although the battery life will vary in
accordance with the frequency and
c o n d i t i o n s   o f   u s e ,   w h e n   c h a r g e d
e v e r y   d a y ,   i t   s h o u l d   n o r m a l l y   b e
p o s s i b l e   t o   u s e   t h e   b a t t e r y   f o r
a p p r o x i m a t e l y   1   y e a r .   I f   t h e
rechargeable battery is not charged
for longer than 6 months, it will self
discharge, resulting in a shortening
o f   i t s   l i f e .   T h e r e f o r e ,   e v e n   i f   t h e
clipper is not being used, be sure to
recharge the battery at least once
every 6 months. If the clipper can be
operated for only about 10 minutes
after it has been correctly recharged
f o r   8   h o u r s ,   i t   i n d i c a t e s   t h a t   t h e
battery has exceeded its useful life
and that it is time to replace it.

Blade Maintenance 

<

Always clean the blade

after each use>

1) Use the cleaning brush to brush

off the cut hairs from the clipper
body and from around the blade.
(Fig.8)

2) Remove the blade and brush off

the cut hairs from the blade edge.

3) B r u s h   t h e   c u t   h a i r s   o u t   f r o m

between the fixed blade and the
moving blade. Press down on the
lever for cleaning in order to raise
the moving blade, and brush the
cut hairs out from between the
blades. (Fig.9)

4) Apply a few drops of the oil to the

points indicated by the arrows.
(Fig.10)

5) Remount the blade on the clipper

body.

04̲08̲ER131取説(欧州)    06.02.27  12:58    ページ 7