Beurer HR6000 - Инструкция по эксплуатации - Страница 22

22

•  If you want to use the length-adjustable comb attachment, attach it to the 

device as shown. 

Here, slide the front part of the length-adjustable comb attachment onto the 

stainless steel razor blade and press the tabs on the back of the length-adjust-

able comb attachment onto the device until you can hear and feel it click into 

place. When selecting the trimming length with the length-adjustable comb 

attachment, we recommend you initially start with the longest cutting length 

so that you can slowly work your way to your desired length. Turn the selection 

dial on the length-adjustable comb attachment to select the required trim-

ming length. The settings on the dial correspond to hair length in millimetres.

•  Press the ON/OFF switch   to switch on the device. The operating display 

begins to light up.

•  Guide the device slowly through the body hair. Ensure that the stainless steel 

razor blade sits as flat against the body as possible.

•  Always only trim small areas.

•  Cut the hair against the direction of growth. If the hair grows in different di-

rections, use the device in multiple directions.

•  Press the ON/OFF switch   again to switch off the device after use. The 

operating display turns off.

9. Cleaning and maintenance

Cleaning the device

WARNING

•  Always pull the mains adapter out of the socket before cleaning the device. 

Risk of electric shock!

•  Remove the length-adjustable comb attachment before cleaning.

•  Only clean the housing of the device with a soft cloth dampened with warm 

water.

•  Do not clean the device with highly flammable liquids. Risk of fire!

•  Do not clean the device in the dishwasher.

•  Clean the stainless steel razor blade and the length-adjustable comb attach-

ment after each use to prevent lots of hair getting jammed inside, which could 

otherwise impede flawless operation. 

•  Leave the length-adjustable comb attachment to dry completely before you re- 

attach it to the device. 

•  If you do not use the device for a long period of time, place the protective cap 

over the stainless steel razor blade and store the device and the length-ad-
justable comb attachment in the storage bag supplied.

Cleaning the stainless steel razor blade

After use, blow on the length-adjustable comb attachment and the stainless 

steel razor blade to remove any hair from them. You can also carefully remove 

wet hair with your fingers. 

WARNING

When cleaning using your fingers, ensure that you do not injure yourself on the 

sharp edges of the stainless steel razor blade.