Beurer HR6000 - Инструкция по эксплуатации - Страница 19

19

•  Only connect the device to a socket that has the correct voltage as indicat-

ed on the type plate.

•  Only operate the device according to the specifications on the type plate.

•  The device may only be operated with the supplied mains adapter.

•  Only pull on the mains adapter to remove the mains cable from the socket.

•  Under no circumstances should you open or repair the device yourself, as 

faultless functionality can no longer be guaranteed thereafter. Failure to comply 

with this instruction will void the warranty.

•  In the event of a fault or damage, have the device repaired by a certified 

specialist workshop.

•  Never leave the device unattended while in use.

•  Do not use the device outside.

•  If you pass on the device to someone else, make sure to also pass on these 

instructions for use.

•  Switch off the device after every use.

•  Pull the mains adapter out of the socket after each completed charging pro-

cess.

CAUTION

•  Protect the device and its accessories from impacts, humidity, dirt, marked 

temperature fluctuations and direct sunlight.

•  Only operate, charge or store the device at temperatures from -10°C to 40°C.

Notes on handling batteries:

•  If your skin or eyes come into contact with fluid from the battery cell, flush 

out the affected areas with plenty of water and seek medical assistance.

•  Risk of explosion! Never throw batteries into a fire.

•  Do not disassemble, split or crush the batteries.

•  Only use chargers specified in the instructions for use.

•  Batteries must be charged correctly prior to use. The instructions from the 

manufacturer and the specifications in these instructions for use regarding 

correct charging must be observed at all times.

•  Fully charge the battery prior to initial use (see Chapter 7).

•  In order to achieve as long a battery service life as possible, fully charge the 

battery at least 2 times a year.