Philips HX8911 Sonicare HealthyWhite+ - Инструкция по эксплуатации - Страница 16

 4 

 Remove the end cap from the toothbrush handle. If the end cap 

does not release easily from the housing, repeat step 3 until the 

end cap is released (Fig. 14).

 5 

 Holding the handle upside down, press the shaft down on a hard surface. 

If the internal components do not easily release from the housing, 

repeat step 3 until the internal components are released.  (Fig. 15)

 6 

 Remove the rubber battery cover (Fig. 16).

 7 

 Wedge the screwdriver between the battery and the black frame at 

the bottom of the internal components. Then pry the screwdriver away 

from the battery to break the bottom of the black frame (Fig. 17).

 8 

 Insert the screwdriver between the bottom of the battery and the 

black frame to break the metal tab connecting the battery to the 

green printed circuit board. This will release the bottom end of the 

battery from the frame (Fig. 18).

 9 

 Grab the battery and pull it away from the internal components  

to break the second metal battery tab (Fig. 19).

Be aware of the sharp edges of the battery tabs so as to avoid 

injury to your fingers.

 10 

 Cover the battery contacts with tape to prevent any electrical 

short from residual battery charge. The rechargeable battery can 

now be recycled and the rest of the product discarded appropriately.

Guarantee and support

If you need information or suppor t, please visit 

www.philips.com/

support

 or read the separate worldwide guarantee leaflet. 

Guarantee restrictions

The terms of the international guarantee do not cover the following:

 - Brush heads.

 - Damage caused by use of unauthorised replacement par ts.

 - Damage caused by misuse, abuse, neglect, alterations or unauthorised 

repair.

 - Normal wear and tear, including chips, scratches, abrasions, 

discolouration or fading.

ENGLISH

16