Philips HX6730 Sonicare HealthyWhite - Инструкция по эксплуатации - Страница 8

     Sensitive mode (speci

fi

 c types only)

  Gentle yet thorough cleaning for sensitive gums and teeth. 

    Clean and White mode 

  2 minutes of Clean mode with an additional 30 seconds of White mode to 

focus on the visible front teeth.

   Note:  When the Sonicare is used in clinical studies, the default 2-minute Clean 

mode must be selected. However, in whitening/stain reduction studies, the 

Clean and White mode must be selected. The handle should be fully charged 

and the Easy-start feature deactivated.

   Features

   Easy-start

    This Sonicare comes with the Easy-star t feature activated. 

    The Easy-star t feature gently increases power over the 

fi

 rst 14 

brushings to help you get used to brushing with the Sonicare.

     Note:  Each of the 

fi

 rst 14 brushings must last at least 1 minute to move 

through the Easy-start ramp-up cycle properly.
   Note:  When the Clean and White mode is selected, the Easy-start feature is 

inactive.

   Deactivating or activating the Easy-start feature

     1 

 Attach the brush head to the handle.

     2 

 Place the handle in the plugged-in charger.

      To deactivate Easy-star t: 

  Press and hold the on/off button for 2 seconds. You hear 1 beep to indicate 

that the Easy-star t feature has been deactivated.

    To activate Easy-star t: 

  Press and hold the on/off button for 2 seconds. You hear 2 beeps to 

indicate that the Easy-star t feature has been activated.

     Note:  Use of the Easy-start feature beyond the initial ramp-up period is not 

recommended and reduces the effectiveness of the Sonicare toothbrush in 

removing plaque.

     Smartimer

  The Smar timer indicates that your brushing cycle is complete by 

automatically switching off the toothbrush at the end of the brushing cycle.

  Dental professionals recommend brushing no less than 2 minutes twice a 

day.

  If you want to pause or stop brushing during the 2-minute brushing cycle, 

press and hold the on/off button for 2 seconds. Press the on/off button 

again and the Smar timer picks up where you left off.

  The Smar timer automatically resets to the beginning of a 2-minute cycle if:

    you stop brushing for 30 seconds or longer.

    you put the handle in the charger.

-

-

-

-

-

-

ENGLISH

8

4235.020.2529.2.indd   8

4235.020.2529.2.indd   8

22-09-2008   10:30:12

22-09-2008   10:30:12