Smeg SE995XT-7 - Инструкция по эксплуатации - Страница 10

42

Instructions for the User

8. USING THE PIZZA FUNCTION

This appliance is equipped with a function specially developed for cooking

pizza with the special plate provided. This function is identified by the 
symbol on the oven functions knob. To cook a pizza, proceed as described
below.

Set the oven functions knob on the

 symbol and the thermostat knob

on the 

 symbol.

Preheat with these settings until the
thermostat light goes out, then place
the pizza on the special plate using
the pizza shovel provided. It does not
normally take more than 3-4 minutes
to cook a pizza to perfection,

although this time may vary depending on the dough used or individual
taste.

8.1

Precautions for using the pizza plate

•  Never use the pizza plate except as described above (for example,

never use it on gas or ceramic hobs, or on ovens not designed to take
this accessory).

•  For conventional cooking operations, it is advisable to remove the

pizza plate and replace it with the bottom cover provided.

•  If you like oil on your pizza, it is best to add it after removal from the

oven since oil stains on the pizza plate are unsightly and may reduce
its efficiency.

Never use any oven function if the pizza plate or cover is not in position.

8.2

To save energy

The pizza stone acts as a heat reservoir. This allows energy consumption
to be reduced, especially in cooking operations requiring medium-long
times. In these cases, simply switch the oven off 10-12 minutes before the
end of the cooking time. The heat gradually emitted by the refractory stone
will ensure that the cooking temperature is maintained.