Kuppersberg RC 699 C - Инструкция по эксплуатации - Страница 13

13

english

Technical passporT

electric oven

Select a temperature.
Select a setting.
It should only light up while the 

oven is heating up to its set working 
temperature.

Smoke is given off while the 

oven is working

This  is  normal  during  its  fi rst  use. 

Periodically clean the oven. Reduce the 
amount of grease or oil added to the 
tray.

Do not use higher temperature 

settings than those in the cooking 
tables.

expected cooking results are 

not achieved

Review the cooking tables to obtain 

guidance on the working of your oven.

Nb

If, despite these recommendations, 

the pro 

blem continues, contact our 

Technical Assistance Service.

t e C h N I CA l  I N F O R M At I O N

If the equipment does not work, 

please contact the Technical Service 
Department and advise them of the 
problem, indicating:

1 Serial number (S-No)
2 Appliance model. (Model)
You will fi nd this information on the 

rating plate on the lower part of the 
oven when the door is opened.

  The item that you have bought 

meets the European directives on 
electrical material safety (73/23/CEE) 

and electromagnetic com 

patibility 

(89/336/CEE).

AENOR  certifi es  the  aptitude  of 

this appliance for the function and 
guarantees the truthful ness of all data 
shown in the energy card.

I N S tA l l At I O N

This information is intended for the 

installer, as the person responsible for 
assembly and electrical connection. 
If you install the oven yourself, 
the manufacturer will not be held 
responsible for any possible damage.

 before  Installation.  Comments

Â

To unpack the oven, pull the tab 

located on the lower part of the box and 
to move it, hold by the lateral handles 
and never by the oven door handle.

Â

A niche is required in the kitchen 

unit as per the dimensions shown 
on  the  fi gure,  providing  a  minimum 
depth  of  580  mm.  (See  fi gures  1  and  2 
describing oven fi tting on the page 68).

Â

To  fi t  multifunction  ovens  in 

their locations, the back part of the unit 
corresponding to the shaded area of 
fi gure 3, must not have any projections 
(reinforcements, pipes, sockets, etc). 
(See the page 68).

Â

The adhesive used for the plastic 

covering of kitchen furniture must be 
able to withstand temperatures up to 
85oC.