Korting OKB 792 CFX - Инструкция по эксплуатации - Страница 34

ELECTRONIC PROGRAMMER with 3 touch control keys for 5-functions and 9-functions ovens.  
(Figure 3.2 and 3.4)  
 
The first start up 

The numbers and the “A” letter on the display are blinking when 
the oven is switched on for the first time, or after a power black-
out: the appliance cannot be operated in this condition. 
To set the time and/or to enable the appliance to operate press 
the “M” key for at least 2 seconds: the “A” letter turns off and the 
numbers now are steady on the display. 
The dot (3) starts blinking: press the “–“  or “+” key to set the time. 
The time is accepted by the programmer just few second after 
having released the key. 

N.B.

: the appliance can be correctly used for coking only when 

you will see the symbol 

 (2) on the display. 

 
Description of the symbols on the display: 

1 

A *  Automatic program is working. (* in some models there is the writing “Auto” instead of “A”) 

2 

  The appliance is ready for manual use (not automatic).  

3 

●

When blinking, the programmer is in setting hour mode. 

4 

  Timer set. 

5 - 

Decreasing numbers when setting the timer.  
Can be also used to choose your desired sound level (3 levels available). 

6 

M  “Mode” key to access the programming options of the programmer. 

7 

+ 

Increasing numbers when setting the timer. 

 
Timer 

The purpose of the timer is just of an acoustic signal, which can be set for a maximum time of 23h59min. 
Once the set time is finished, the   (4) symbol turns off and an acoustic signal is heard; this sound will 
switch off automatically in 7 minutes, or you can stop it by pressing any key of the programmer. To set the 
timer press the “M” key for 2 seconds, or just for enough time to see the   (4) symbol blinking. Set the timer 
by using the “+” or “–“ keys.  Release the “+” or “–“ key when you have matched the desired time.  
In a few seconds the current time appears on the display together with the   (4) symbol. The countdown 
starts immediately. 

Semi-automatic cooking mode 
Cooking time: 

Once having selected a cooking function and set the desired temperature, press the “M” key for 2 seconds to 
access the programming mode. The   (4) symbol appears. Release and press again the “M” key. The “A” 
symbol starts blinking and the “dur” message appears on the display, then it changes to “0

●

 00”. 

Set the cooking time with the “–“ or “+” keys. (maximum available time: 10h00m). 
The selected time is automatically processed by the programmer in a few seconds, or you can also touch the 
“M” key many times just to see again the current time. The “A” symbol and 

 (2) symbol will be on the 

display. 
Once the set cooking time is finished, an acoustic signal will be heard and the oven automatically switches 
off. Please, see the following paragraphs about how to disable the sound alarm and restart the oven. 
 

End of cooking: 

Once having selected a cooking function and set the desired temperature, touch the “M” key for at least 2 
seconds to access the programming mode.  
The   (4) symbol switches on. Release and touch again the “M” key. 
The “A” symbol starts blinking and the writing “dur” appears on the display. Touch again the “M” key. The 
writing “End” appears on the display. The last one changes to the symbol “0

●

 00” few seconds after.  

Set the end of cooking time with the keys “–“ or “+”. (maximum available time: 23h59min). 
The selected time is automatically processed by the programmer in a few seconds, or you can also touch the 
“M” key many times just to see again the current time.  

32