Духовые шкафы Korting OKB 550 CFX - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
The speed with which the numbers change on the display will increase a few second after pressing the
buttons “+” or “-“.
Manual cooking mode (without using the programmer)
To use the oven without the help of the programmer, you will need to cancel the flashing “AUTO” message.
To do so, just press button “4”.
If the “AUTO” message is steady, showing that the oven has been programmed, you will need to cancel the
program by pressing the button “4” so that the display shows “0”.
Automatic cooking mode (start and end of cooking time)
1) Program the length of cooking time with button “2”
2) Program the end of cooking time with button “3”
3) Select the desired temperature using the temperature regulation knob and select the desired function
using the function selector knob. The “AUTO” symbol on the display will indicate that the oven has been
programmed.
Practical example:
You want to cook for 45 minutes, ending at 14.00
- By pressing “2” you set 0.45 on the display
- By pressing “3” you set 14.00 on the display.
After these operations the current time and the “AUTO” symbol will appear on the display, to indicate that the
programming has been memorized.
At 13.15 (14.00 less 45 min.) the oven will start automatically, and during cooking the symbols “2” and
“AUTO” will be shown on the display.
At 14.00 the cooking will stop automatically. An acoustic signal will sound. You can stop the acoustic signal
by pressing button “1”.
Semi-automatic cooking mode
A) Programming the cooking time.
B) Programming the end of cooking time.
A) Set the desired cooking time using the button “2”.
Cooking will start immediately, and the display will show the following symbols: “AUTO” and “2”.
When the programmed time has expired, cooking will stop, and an acoustic signal will sound. You can stop
the acoustic signal by pressing button “1”.
B) Set the desired end of cooking time using the button “3”.
Cooking will start immediately, and the display will show the following symbols: “AUTO” and “2”. At the
established time, cooking will stop, and an acoustic signal will sound. You can stop the acoustic signal by
pressing button “1”. It is possible to view the programming status at any time by pressing the corresponding
button. You can also cancel the programming at any time by pressing the button “2” and setting the display
to 0.00.
Then by pressing the button “4”, the oven will switch to manual functioning.
Using the timer.
The function of the timer consists simply of an acoustic signal that can be set for a maximum period up to 23
hours and 59 minutes.
To set the timer, press the button “1”, and at the same time “+” or “-“ until the display shows the desired time.
When setting is complete, the clock will once again show on the display along with the symbol “1”.
The countdown will start immediately and can be seen on the display at any time, by pressing the button “1”.
After the set time has expired, the symbol “1” will disappear, and an acoustic signal will sound. You can stop
the acoustic signal by pressing button “1”.
ATTENTION!
An energy blackout will cancel all the programmed functions, including the clock. After a blackout, the
symbol “0.00” will be flashing on the display and the oven cannot be operated. You need to press the button
“1” to stop flashing, then you can set the clock and the oven is ready for functioning again.
32
