Fulgor Milano LO 6213 TC WH - Инструкция по эксплуатации - Страница 68

69

68

GB

68

GB

Electrical connections

Before connecting the oven to the mains power supply, make sure that:

-  The supply voltage corresponds to the specifications on the data plate on the front of the oven. 
-  The mains supply has an efficient earth (ground) connection complying with all applicable laws and 

regulations. Correct earthing (grounding) is a legal requirement. 

The power cable should never reach a temperature 50° C above ambient temperature at any point 
along its length. 
If a fixed appliance is not provided with a power cable and plug, or some other device permitting it 
to be disconnected from the mains electricity supply, with a gap between the contacts big enough to 
guarantee class III overvoltage protection, then such a device must be fitted to the power supply in 
compliance with the regulations governing electrical installations. 
The socket or switch must be easily reachable with the oven fully installed. 

N.B. The manufacturer declines all responsibility for damage or injury if the above 
instructionsntinfortunistiche non vengano rispettate.

CABLE TYPES AND MINIMAL DIAMETERS

SASO

H05RR-F 3x1,5 mm²

H05RR-F 3x2,5 mm²

H05VV-F 3x1,5 mm²

H05VV-F 3x2,5 mm²

H05RN-F 3x1,5 mm²

H05RN-F 3x2,5 mm²

H05V2V2-F 3x1,5 mm²

H05V2V2-F 3x2,5 mm²