Fulgor Milano LO 6213 TC WH - Инструкция по эксплуатации - Страница 55

54

55

GB

54

55

GB

The control suggests a temperature for each function, which you can change at any time, but 
if you consider it suitable, you don’t need to do anything else, the oven will start by itself in just 
a few seconds!

Setting the temperature

The uses a temperature probe that is accurate to ±5 °C for the maximum reliability of the cooking 
temperatures requested.
You can change the temperature at any time. After selecting the cooking function, just touch the 
symbols 

 and the setting range varies from +50 °C to MAX.

You don’t need to confirm the change, the control turns on by itself after a few seconds. 

During heating, the centigrade symbol (°C) flashes 
to indicate that it is heating up to reach the selected 
temperature. When the temperature is reached, it 
beeps.

NOTE: some models may display the current temperature in the oven until the temperature set is 
reached. If you want to check the temperature set, press any one of the 

 buttons and, if you wish, 

you can use them to change the temperature set.