Духовые шкафы Fulgor Milano FCPO 6215 P TEM BK - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
35
22 - Solving Operational Problems
Before contacting service, check the following to avoid unnecessary service charges.
Oven Problem
Problem Solving Steps
Error F1030* or F2030* appears in the display window. A problem with latch mechanism occurred. Remove power and
turn it back on again after a few seconds. The oven should run
a latch auto–test. If condition persists, note the code number (in
the EVENT LOG list) and contact service.
Other F__ Error appears in the display window.
Remove power and turn it back on again after a few seconds.
If condition persists, note the code number (in the EVENT LOG
list) and contact service.
The oven display stays OFF
Turn off power at the main power supply (fuse or breaker box).
Turn breaker back on.
If condition persists, call an authorized service.
Cooling fan continues to run after oven is turned off
The fan turns off automatically when the electronic components
have cooled sufficiently.
Oven door is locked and will not release, even after
cooling
Turn the oven off at the circuit breaker and wait a few seconds.
Turn breaker back on.
The oven should reset itself and will be operable.
Oven is not heating
Check the circuit breaker or fuse box to your house. Make sure
there is proper electrical power to the oven. Make sure the
oven temperature has been selected.
Oven is not cooking evenly
Refer to cooking charts for recommended rack position. Always
reduce recipe temperature by 25°F (15°C) when baking with
Convection Bake mode.
Oven light is not working properly
Replace or reinsert the light bulb if loose or defective. See Page
33. Avoid touching the bulb glass with bare fingers as finger
oil may cause bulbs to burn out prematurely.
Oven light stays on
Check for obstruction in oven door. Check to see if hinge is
bent or door switch broken.
Oven will not Self-Clean properly
Allow the oven to cool before running Self-Clean. Always wipe
out loose soils or heavy spill-over before running Self-Clean. If
oven is badly soiled, set oven for a four-hour Self-Clean. See
Preparing the Oven to Self-Clean, Page 31.
Clock and timer are not working properly
Make sure there is proper electrical power to the oven. See the
Clock sections on Page12.
Excessive moisture
When using Bake mode, preheat the oven first. Convection
Bake and Convection Roast will eliminate any moisture in oven
(this is one of the advantages of convection).
Porcelain chips
When oven racks are removed and replaced, always tilt racks
upward and do not force them to avoid chipping the porcelain.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
