Franke 116.0609.447 - Инструкция по эксплуатации - Страница 11

EN

11

REPLACING THE LAMP

1. Disconnect the oven from the power supply�

2. Remove the cover from the light, replace the bulb

and put the cover back on the light�

3. Reconnect the oven to the power supply�

Please note: Only use 20-40 W/230 ~ V type G9, T300°C 

halogen bulbs. The bulb used in the product is specifically 

designed for domestic appliances and is not suitable for 

general room lighting within the home (EC Regulation 

244/2009). Light bulbs are available from our After-sales 

Service.

- If using halogen bulbs, do not handle them with your bare

hands as your fingerprints could cause damage. Do not use

the oven until the light cover has been refitted.

Problem

Possible cause

Solution

The oven does not work�

Power cut�

Disconnection from the 

mains�

Check for the presence of mains electrical 

power and whether the oven is connected to 

the electricity supply�

Turn off the oven and restart it to see if the 

fault persists�

TROUBLESHOOTING

001

In the event of any operation problems, contact a Franke 

Technical Service Centre� 

Never use the services of unauthorized technicians� 

Specify:

- the type of fault

- the appliance model (art�/Code)

- the serial number (S�N�) on the rating plate, located

on  the right hand edge of the oven cavity (visible

when the oven door is open)�

When contacting our 

Service Centre, please 

state the codes provided 

on your product's 

identification plate�

XXXXXX XXXXXX       XXXXX XXXXXXX

Model: xxxXXXXxx 

XXXXXXXXXX

XXXXXX 

XXXXXXXXXX

XXXXXXXXXX

XX

XXXXXXXXXXX

XXXXXXX

XXXXXXXXXX

SUPPORT