Skil 6280 (F0156280LA) - Инструкция по эксплуатации - Страница 9

9

•  Holding and guiding the tool 

$

!  while working, always hold the tool at the 

grey-coloured grip area(s)

- 

always use auxiliary handle F 

2

 (can be adjusted 

as illustrated) (

6280

)

-  keep ventilation slots H 

2

 uncovered

-  do not apply too much pressure on the tool; let the tool 

do the work for you

APPLICATION ADVICE

•  Use the appropriate bits 

%

!  only use sharp bits

•  For drilling in concrete or stone a steady pressure on the 

drill is required

•  When drilling ferrous metals

-  pre-drill a smaller hole, when a large hole is required

-  lubricate drill bit occasionally with oil

•  Splinterfree drilling in wood 

^

•  Dustfree drilling in walls 

&

•  Dustfree drilling in ceilings 

*

•  Drilling in tiles without skidding 

(

•  For more tips see www.skil.com

MAINTENANCE / SERVICE

•  This tool is not intended for professional use

•  Always keep tool and cord clean (especially ventilation 

slots H 

2

)

!  disconnect the plug before cleaning

•  If the tool should fail despite the care taken in 

manufacturing and testing procedures, repair should be 

carried out by an after-sales service centre for SKIL 

power tools

-  send the tool 

undismantled

 together with proof of 

purchase to your dealer or the nearest SKIL service 

station (addresses as well as the service diagram of 

the tool are listed on www.skil.com)

ENVIRONMENT

• 

Do not dispose of electric tools, accessories and 

packaging together with household waste material

(only for EU countries)

-  in observance of European Directive 2012/19/EC on 

waste of electric and electronic equipment and its 

implementation in accordance with national law, 

electric tools that have reached the end of their life 

must be collected separately and returned to an 

environmentally compatible recycling facility

-  symbol 

5

 will remind you of this when the need for 

disposing occurs

DECLARATION OF CONFORMITY 

Impact drill 6002 6280

Technical data 

1

•  We declare under our sole responsibility that the product 

described under “Technical data” is in conformity with the 

following standards or standardization documents: EN 

60745, EN 61000, EN 55014, in accordance with the 

provisions of the directives 2004/108/EC (until 

19.04.2016), 2014/30/EU (from 20.04.2016), 2006/42/

EC, 2011/65/EU

• 

Technical file at

: SKIL Europe BV (PT-SEU/ENG1), 

4825 BD Breda, NL

¹ÊÁÂÆιƼ½ÊÇǾ¼½Æ

ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿

ÍÊÇȽƓˁ˅ʿ˂ ʽ¼¹Ɠ

Ĺ¾ ÁÂÿʹ¹¾

ÈÈÊÇιĹƹ¿½Ê

04.03.2015

NOISE/VIBRATION

•  Measured in accordance with EN 60745 the sound 

pressure level of this tool is 92 dB(A) and the sound 

power level 103 dB(A) (standard deviation: 3 dB), and the 

vibration 

✱

 (triax vector sum; uncertainty K = 1.5 m/s²)

✱

 when drilling in metal 2,9 m/s²

✱

 when impact drilling in concrete 15,9 m/s²

•  The vibration emission level has been measured in 

accordance with a standardised test given in EN 60745; it 

may be used to compare one tool with another and as a 

preliminary assessment of exposure to vibration when 

using the tool for the applications mentioned

-  using the tool for different applications, or with different 

or poorly maintained accessories, may significantly 

increase

 the exposure level

-  the times when the tool is switched off or when it is 

running but not actually doing the job, may significantly 

reduce

 the exposure level

!  protect yourself against the effects of vibration 

by maintaining the tool and its accessories, 

keeping your hands warm, and organizing your 

work patterns

Perceuse à percussion 

6002/6280

INTRODUCTION

•  Cet outil est conçu pour les travaux de perçage de 

percussion dans la brique, le béton et dans la pierre 

naturelle ainsi que le perçage dans le bois, le métal, la 

céramique et les matières plastiques

•  Cet outil n’est conçu pour un usage professionnel

•  Lisez et conservez ce manuel d’instruction 

3

CARACTERISTIQUES TECHNIQUES 

1

ELEMENTS DE L’OUTIL 

2

A

  Interrupteur de marche/arrêt et réglage de vitesse

B

  Bouton de blocage de l’interrupteur

C

  Molette de réglage de la vitesse maximum

D

  Commutateur pour inverser le sens de rotation

E

  Commutateur pour sélectionner la fonction de perçage

F

  Poignée auxiliaire

G

  Jauge de profondeur

H

  Fentes de ventilation