Skil 6280 (F0156280LA) - Инструкция по эксплуатации - Страница 8

8

e) 

Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s 

operation. If damaged, have the power tool repaired 

before use.

 Many accidents are caused by poorly 

maintained power tools.

f) 

keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control.

g) 

Use the power tool, accessories and tool bits etc., in 

accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations different 

from those intended could result in a hazardous situation.

5) SERVICE

a) 

Have your power tool serviced by a qualified repair 

person using only identical replacement parts.

 This 

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR IMPACT DRILLS

GENERAL

•  This tool should not be used by people under the age of 

16 years

•  Always disconnect plug from power source before 

making any adjustment or changing any accessory

• 

wear ear protectors

 (exposure to noise can cause 

hearing loss)

• 

Use auxiliary handle(s), if supplied with the tool

(loss of control can cause personal injury) (

6280

)

•  Use completely unrolled and safe extension cords with a 

capacity of 16 Amps (U.K. 13 Amps)

• 

Do not work materials containing asbestos

 (asbestos 

is considered carcinogenic)

•  Dust from material such as paint containing lead, some 

wood species, minerals and metal may be harmful 

(contact with or inhalation of the dust may cause allergic 

reactions and/or respiratory diseases to the operator or 

bystanders); 

wear a dust mask and work with a dust 

extraction device when connectable

•  Certain kinds of dust are classified as carcinogenic (such 

as oak and beech dust) especially in conjunction with 

additives for wood conditioning; 

wear a dust mask and 

work with a dust extraction device when 

connectable

•  Follow the dust-related national requirements for the 

materials you want to work with

BEFORE USE

•  Always check that the supply voltage is the same as the 

voltage indicated on the nameplate of the tool

•  Avoid damage that can be caused by screws, nails and 

other elements in your workpiece; remove them before 

you start working

• 

Use suitable detectors to find hidden utility lines or 

call the local utility company for assistance

 (contact 

with electric lines can lead to fire or electrical shock; 

damaging a gas line can result in an explosion; 

penetrating a water pipe will cause property damage or 

an electrical shock)

• 

Secure the workpiece

 (a workpiece clamped with 

clamping devices or in a vice is held more securely than 

by hand)

•  Never use the tool when cord is damaged; have it 

replaced by a qualified person

ACCESSORIES

•  SKIL can assure flawless functioning of the tool only 

when original accessories are used

•  Use only accessories with an allowable speed matching 

at least the highest no-load speed of the tool

DURING USE

•  Always keep the cord away from moving parts of the tool

•  If the drill bit becomes unexpectedly jammed (causing a 

sudden, dangerous reaction), immediately switch off the 

tool

• 

Hold the power tool only by the insulated gripping 

surfaces when performing an operation where the 

accessory may contact hidden wiring or its own 

power cord

 (contact with a “live” wire will also make 

exposed metal parts of the power tool “live” and shock 

the operator)

•  In case of electrical or mechanical malfunction, 

immediately switch off the tool and disconnect the plug

•  If the cord is damaged or cut through while working, do 

not touch the cord, but immediately disconnect the plug

AFTER USE

•  When you put away the tool, switch off the motor and 

ensure that all moving parts have come to a complete 

standstill

EXPLANATION OF SYMBOLS ON TOOL

3

 Read the instruction manual before use

4

 Double insulation (no earth wire required)

5

 Do not dispose of the tool together with household waste 

material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

•  Do not connect the blue (= neutral) or brown (= live) wire 

in the cord of this tool to the earth terminal of the plug

•  If for any reason the old plug is cut off the cord of this tool, 

it must be disposed of safely and not left unattended

USE

•  On/off 

6

•  Switch locking for continuous use 

7

•  Speed control for smooth starting 

8

•  Maximum speed control 

9

With wheel C the maximum speed can be adjusted from 

low to high

-  switch on the tool

-  lock the switch

-  turn wheel C to select maximum speed

•  Changing direction of rotation 

0

-  when not properly set in left/right position, switch A 

2

cannot be activated

!  change direction of rotation only when tool is at a 

complete standstill

•  Normal drilling versus impact drilling 

!

!  select drilling function only when tool is switched 

off and plug is disconnected

•  Changing bits 

@

-  insert the bit as deep as possible in the chuck

!  do not use bits with a damaged shank

•  Adjusting drilling depth 

#

 (

6280

)