Metabo BEV 1300-2 - Инструкция по эксплуатации - Страница 10

ENGLISH

en

10

Original instructions

We, being solely responsible, hereby declare that 
these drills, identified by type and serial number *1), 
meet all relevant requirements of directives *2) and 
standards *3). Technical documents for *4) - see 
page 3.

The drill is suitable for non-impact drilling into metal, 
wood, plastic and similar materials. It is also 
suitable for thread tapping and screwdriving.
The user bears sole responsibility for any damage 
caused by improper use.
Generally accepted accident prevention 
regulations and the enclosed safety information 
must be observed.

For your own protection and for the 
protection of your electrical tool, pay 
attention to all parts of the text that are 
marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 
fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 
documents.

Use the additional handle supplied with the 

tool.

 Loss of control can cause personal injury.

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Cutting accessory 

contacting a “live” wire may make exposed metal 
parts of the power tool “live” and could give the 
operator an electric shock.
Pull the plug out of the plug socket before any 
adjustments or servicing are performed.
Avoid inadvertent starts by always unlocking the 
switch when the plug is removed from the mains 
socket or in case of a power cut.
Ensure that the spot where you wish to work is 
free of 

power cables, gas lines or water pipes

(e.g. using a metal detector).
Smaller workpieces must be secured such that they 
are not carried along with the drill bit when drilling 

(e.g. by clamping in a vice or on a work bench with 
screw clamps).
Keep hands away from the rotating tool! Remove 
chips and similar material only when the machine is 
not in operation.
Metabo S-automatic safety clutch. When the safety 
clutch responds, switch off the machine 
immediately! If the tool jams or catches, the power 
supply to the motor is restricted. Due to the strong 
force which can arise, always hold the machine with 
both hands using the handles provided, stand 
securely and concentrate.
The Metabo S-automatic safety clutch must not be 
used for torque control.
Caution must be exercised when driving screws into 
hard materials (driving screws with metric or 
imperial threads into steel)! The screw head may 
break, or a high reverse torque may build up on the 
handle.

Reducing dust exposure:

Some of the dust created using this power tool 
may contain substances known to cause 

cancer, allergic reaction, respiratory disease, birth 
defects or other reproductive harm. Some 
examples of these substances are: lead (from lead-
based paints), crystalline silica (from bricks cement, 
etc.), additives for wood treatment (chromate, wood 
preservative), some types of wood (like oak and 
beech dust), metals, asbestos.
The risk from exposure to such substances will 
depend on how long the user or nearby persons are 
being exposed.
Do not let particles enter the body.
To reduce exposure to these substances: work in a 
well ventilated area and wear protective equipment, 
such as dust masks that are specially designed to 
filter out microscopic particles.
Observe the relevant guidelines for your material, 
staff, application and place of application (e.g. 
occupational health and safety regulations, 
disposal).
Collect the generated particles at the source, avoid 
deposits in the surrounding area.
Use only suitable accessories. In this way, fewer 
particles enter the environment in an uncontrolled 
manner. 
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- Do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 
or on dust deposits.

- Use an extraction unit and/or air purifiers.
- Ensure good ventilation of the workplace and 

keep it clean using a vacuum cleaner. Sweeping 
or blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow, 

beat or brush.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions