Makita HP2051F - Инструкция по эксплуатации - Страница 4

4

ENGLISH

Explanation of general view

1

Grip  base

2

Side grip (auxiliary handle)

3

Teeth

4

Protrusions

5

Loosen

6

Tighten

7

Bit

8

Chuck key

9

Sleeve

10

Ring

11

Depth gauge

12

Lower

13

Higher

14

Speed control screw

15

Switch trigger

16

Lock button

17

Reversing switch lever

18

Lamp

19

Speed change knob

20

Arrow

21

Action mode changing lever

22

Blow-out bulb

23

Vent holes

Model

HP2050/HP2050F

HP2051/HP2051F

Max. capacities
Concrete

 Tungsten-carbide tipped bit ........................... High: 

20 mm

20 mm

Steel  ................................................................. High: 

8 mm

8 mm

Low: 

13 mm

13 mm

Wood  ................................................................ High: 

5 mm

25 mm

Low: 

40 mm

40 mm

No load speed (min

-1 

) ...................................... High: 

0 – 2,900

0 – 2,900

Low: 

0 – 1,200

0 – 1,200 

Blows per minute .............................................. High: 

0 – 58,000

0 – 58,000

Low: 

0 – 24,000

0 – 24,000

Overall length ................................................................. 362 mm

360 mm

Net weight ...................................................................... 2.3 kg

2.3 kg

• Due to our continuing programme of research and

development, the specifications herein are subject to
change without notice. 

• Note: Specifications may differ from country to countr y. 

Intended use

The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
ear th wire.

SAFETY INSTRUCTIONS 

Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury,
including the following. Read all these instruc-
tions before attempting to operate this product
and save these instructions. 

For safe operation: 

1.

Keep work area clean 

Cluttered areas and benches invite injuries. 

2.

Consider work area environment 

Don’t expose power tools to rain. Don’t use
power tools in damp or wet locations. Keep work
area well lit. Don’t use power tools in presence of
flammable liquids or gases. 

3.

Guard against electric shock 

Prevent body contact with grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators). 

4.

Keep children away 

Do not let visitors contact tool or extension cord.
All visitors should be kept away from work area. 

5.

Store idle tools 

When not in use, tools should be stored in dry,
high, or locked-up place, out of the reach of chil-
dren. 

6.

Don’t force tool 

It will do the job better and safer at the rate for
which it was intended. 

7.

Use right tool 

Don’t force small tools or attachments to do the
job of a heavy duty tool. Don’t use tools for pur-
poses not intended; for example, don’t use circu-
lar saw for cutting tree limbs or logs. 

8.

Dress properly 

Do not wear loose clothing or jewelry. They can
be caught in moving par ts. Rubber gloves and
non-skid footwear are recommendemd when
working outdoors. Wear protective hair covering
to contain long hair. 

9.

Use safety glasses and hearing protection 

Also use face or dust mask if cutting operation is
dusty. 

10. Connect dust extraction equipment 

If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.