Bort BSM-500-P - Инструкция по эксплуатации - Страница 8

8

•  If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected sup-
ply. Use of an RCD reduces the risk of electric shock.

Personal safety

•  Stay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a power 
tool while you are tired or under the infl uence of drugs, 
alcohol or medication. A moment of inattention while 
operating power tools may result in serious personal 
injury.

•  Use personal protective equipment. Always wear eye 

protection. Protective equipment such as dust mask, 
non-skid safety shoes, hard hat, or hearing protection 
used for appropriate conditions will reduce personal 
injuries.

•  Prevent unintentional starting. Ensure the switch is in 

the off -position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying 
power tools with your fi nger on the switch or energising 
power tools that have the switch on invites accidents.

•  Remove any adjusting key or wrench before turning the 

power tool on. A wrench or a key left attached to a rotat-
ing part of the power tool may result in personal injury.

•  Do not overreach. Keep proper footing and balance at 

all times. This enables better control of the power tool in 
unexpected situations.

•  Dress properly. Do not wear loose clothing or jewellery. 

Keep your hair, clothing and gloves away from mov-
ing parts. Loose clothes, jewellery or long hair can be 
caught in moving parts.

•  If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected 
and properly used. Use of dust collection can reduce 
dust-related hazards.

Power tool use and care

•  Do not force the power tool. Use the correct power 

tool for your application. The correct power tool will 
do the job better and safer at the rate for which it was 
designed.

•  Do not use the power tool if the switch does not turn 

it on and off . Any power tool that cannot be controlled 
with the switch is dangerous and must be repaired.

•  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. Such preventive safety measures reduce the risk of 
starting the power tool accidentally.

•  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 
or these instructions to operate the power tool. Power 
tools are dangerous in the hands of untrained users.

•  Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 
condition that may aff ect the power tool’s operation. 
If damaged, have the power tool repaired before use. 
Many accidents are caused by poorly maintained power 
tools.

•  Keep cutting tools sharp and clean. Properly maintained 

cutting tools with sharp cutting edges are less likely to 
bind and are easier to control.

•  Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into account 
the working conditions and the work to be performed. 
Use of the power tool for operations diff erent from 
those intended could result in a hazardous situation.

Service

Have your power tool serviced by a qualifi ed repair person 
using only identical replacement parts. This will ensure 
that the safety of the power tool is maintained.

SAFETY WARNINGS FOR DRILLS

•  Wear ear protectors when impact drilling. Exposure to 

noise can cause hearing loss.

•  Use auxiliary handle(s), if supplied with the tool. Loss of 

control can cause personal injury.

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 
may contact hidden wiring or its own cord. Cutting 
accessory contacting a “live” wire may make exposed 
metal parts of the power tool “live” and could give the 
operator an electric shock.

•  Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 
for assistance. Contact with electric lines can lead to 
fi re and electric shock. Damaging a gas line can lead 
to explosion. Penetrating a water line causes property 
damage or may cause an electric shock.

• Switch off  the power tool immediately when the tool 

insert jams. Be prepared for high reaction torque that 
can cause kickback. The tool insert jams when:
– the power tool is subject to overload
– it becomes wedged in the workpiece.

•  Hold the machine with a fi rm grip. High reaction torque 

can briefl y occur while driving in and loosening screws.

•  When working with the machine, always hold it fi rmly 

with both hands and provide for a secure stance. The 
power tool is guided more secure with both hands.

•  Secure the workpiece. A workpiece clamped with 

clamping devices or in a vice is held more secure than 
by hand.

•  Always wait until the machine has come to a complete 

stop before placing it down. The tool insert can jam and 
lead to loss of control over the power tool.

MAINTENANCE AND CLEANING

Make sure that the machine is not live when carry-
ing out maintenance work on the motor.

•  Regularly clean the machine housing with a soft cloth, 

preferably after each use. Keep the ventilation slots free 
from dust and dirt.If the dirt does not come off  use a soft 
cloth moistened with soapy water. Never use solvents 
such as petrol, alcohol, ammonia water, etc. These sol-
vents may damage the plastic parts.

•  The machine requires no additional lubrication.
•  Should a fault occur, e.g. after wear of a part, please 

contact your local BORT GLOBAL LIMITED dealer.