Makita UT1305 - Инструкция по эксплуатации - Страница 3

3 

ENGLISH (Original instructions) 

Explanation of general view 

1-1. Lock button 
1-2. Switch trigger 
2-1. Indicator lamp 
3-1. Hex nut 
3-2. Shaft 
3-3. Shaft holder 

4-1. Wrench 19 
4-2. Notch 
4-3. Wrench 19 
6-1. Mixing blade 
6-2. Shaft 
6-3. Hex bolt 

7-1. Filter 
7-2. Cover 
7-3. Screwdriver 
8-1. Limit mark 
9-1. Screwdriver 
9-2. Brush holder cap 

SPECIFICATIONS 

Model UT1305 

No load speed (min

-1

) 1,300 

Mixing blade diameter 

165 mm 

Overall length 

942 mm 

Net weight 

3.3 kg 

Safety class 

/II 

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice. 
• Specifications may differ from country to country. 
• Weight according to EPTA-Procedure 01/2003 

ENE056-1 

Intended use

The tool is intended for mixing wall materials, etc. 
(except flammable materials) 

ENF002-2 

Power supply

The tool should be connected only to a power supply of 
the same voltage as indicated on the nameplate, and 
can only be operated on single-phase AC supply. They 
are double-insulated and can, therefore, also be used 
from sockets without earth wire. 

ENG905-1 

Noise

The typical A-weighted noise level determined according 
to EN60745: 

Sound pressure level (L

pA

) : 82 dB(A) 

Sound power level (L

WA

) : 93 dB(A) 

Uncertainty (K) : 3 dB(A) 

Wear ear protection

ENG900-1 

Vibration 

The vibration total value (tri-axial vector sum) 
determined according to EN60745: 

Vibration emission (a

h

) : 2.5 m/s

2

 or less 

Uncertainty (K) : 1.5 m/s

2 

ENG901-1 

• 

The declared vibration emission value has been 
measured in accordance with the standard test 
method and may be used for comparing one tool 
with another. 

• 

The declared vibration emission value may also be 
used in a preliminary assessment of exposure. 

WARNING: 

• 

The vibration emission during actual use of the 
power tool can differ from the declared emission 
value depending on the ways in which the tool is 
used. 

• 

Be sure to identify safety measures to protect the 
operator that are based on an estimation of 
exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH101-15 

For European countries only 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine:   
Power Mixer 
Model No./ Type: UT1305 
are of series production and 

Conforms to the following European Directives: 

2006/42/EC 

And are manufactured in accordance with the following 
standards or standardised documents: 

EN60745 

The technical documentation is kept by our authorised 
representative in Europe who is:   

Makita International Europe Ltd. 
Michigan Drive, Tongwell, 
Milton Keynes, Bucks MK15 8JD, England