Profi Cook PC-HWS 1145 - Инструкция по эксплуатации - Страница 40

40

PC-HWS1145_IM_new

22.09.17

Problem

Possible Cause

Solution

“E7” will appear on 

the display. You will 

hear 20 signal tones.

The water tank is 

empty.

1.  Fill the water tank with cold water immediately.

2. 

Unlock the appliance with the “Lock” button. The appliance saved the settings 

last selected. There is no option to visibly change the settings. When tapping 

the illuminated buttons the settings change but no values will be indicated in 

the display.

3. 

You may either put an empty vessel on the drip tray cover to dispense the en

-

tire preset amount of water. Or you stop dispensing water manually with the 

“Start / Stop” button once the desired amount of water has been dispensed.

4.  The error message goes disappeared when dispensing water. The values 

last set can be seen in the display.

Another option:
1.  Disconnect the appliance from the power supply.

2. 

After filling the water tank connect the power plug with the socket again. 

3. 

Unlock the appliance with the “Lock” button. The deafult setting will be shown 

in the display. 

4.  Proceed as described under chapter “

Operation

” point 4.

The appliance is 

despensing water 

without heating it up.

The over temper

-

ature protection is 

enabled.

1.  Use the key for resetting the error message. Use this key to press the 

“RESET” button on the housing.

2. 

Proceed as described under chapter “

First use

”.

Technical Data

Model:

................................................................

PC-HWS 1145

Power supply:

.......................................

220 - 240 V~, 50 / 60 Hz

Power consumption:

 ...........................................

2200 - 2600 W

Protection class:

 .......................................................................

Filling quantity:

 ........................................................

max. 4 Litre

Net weight:

 .......................................................

approx. 2.95 kg

The right to make technical and design modifications in the 

course of continuous product development remains reserved.
This appliance complies with all current CE directives, such 

as electromagnetic compatibility and low voltage directive and 

is manufactured according to the latest safety regulations.

Disposal

Meaning of the “Wheelie Bin” Symbol

Take care of our environment, do not dispose of 

electrical appliances via the household waste.
Dispose of obsolete or defective electrical appli

-

ances via municipal collection points. 

Please help to avoid potential environmental and 

health impacts through improper waste disposal.

You contribute to recycling and other forms of utilization of old 

electric and electronic appliances.

Your municipality provides you with information about collect

-

ing points.