Smeg KLF04SSEU - Инструкция по эксплуатации - Страница 13

Use

32

10. Pick up the kettle by the handle and 

pour the hot water into the desired 
recipient (cups, teapot etc.). 

11. If no command is given within 60 

seconds, the kettle will enter Stand-by 
mode (all LEDs off). Pressing any key will 
reactivate the kettle, placing it in 
Temperature SELECTION mode starting 
from the last temperature set. Now 
follow the operations from point 7 
onwards in section ”3 Use”.

3.3 Keep Warm function

This function allows you to keep the water in 
the kettle at the selected temperature for a 
maximum of 20 minutes.
This function can be activated at any 
moment during the heating cycle by 
pressing the Keep Warm key (the 
corresponding LED turns on to confirm the 
selection). Pressing the key again exits then 
Keep Warm function and the LED will turn 
off. After 20 minutes have passed, the kettle 
enters Stand-by mode.

3.4 Mute Function

This function allows you to deactivate the 
kettle ON/OFF, START/STOP, and end of 
cycle sounds.
The function can be activated by pressing 
the Keep Warm key for 5 seconds (the 
corresponding LED lights up and flashes 
while the operation is stored).
Pressing the Keep Warm key again for 5 
seconds (the corresponding LED will light 
up and flash) exits the Mute function, 
reactivating the sounds.

Danger of burns

•  Wait a few seconds from when the 

kettle boils, then pour the water out 
slowly to prevent it spraying or coming 
out too fast.

•  Do not fill the kettle beyond the 

maximum level (1.7 litres) – risk of burns 
when pouring.

•  Do not tilt the hot kettle excessively – the 

boiling water could spray out, with a risk 
of burns.

•  Keep your face at a safe distance from 

the lid to avoid the risk of burns from 
escaping steam.