Smeg KLF04SSEU - Инструкция по эксплуатации - Страница 10

Use

29

ENEN

3 Use

3.1 Before first use

1. Remove all stickers and labels from the 

kettle and clean the outside with a damp 
cloth.

2. Remove the scale filter behind the spout 

and wash it under running water.

3. Replace the filter in the correct position. 
4. Remove the kettle from its base, press the 

button to open the lid and fill it to the 
maximum level.

5. Close the lid and place the kettle back 

on its base. Check that the pre-set 
temperature is 100°C (if this not the 
case, see point 7 of section”3.2 
Operation”), then press the START/
STOP key to start the boiling cycle.

6. Wait for the water to boil, then empty the 

kettle, disposing of the boiling water 
safely. Repeat this operation at least 
three times.

Danger of electrocution

•  Plug into a earthed 3-prong outlet.
•  Do not remove the earth prong.
•  Do not use an adapter.
•  Do not use an extension cord.
•  Failure to follow these instructions could 

result in death, fire, or electrical shock.

This appliance can be operated 
both at 50 Hz and at 60Hz 
without any adjustment.

Hot surfaces

•  Surfaces are liable to get hot.

Tips and suggestions for the user

•  Do not use the kettle to heat anything 

other than water – this would risk 
causing severe damage to the 
appliance.

•  Only boil the quantity of water 

required so as not to waste water, 
electricity and your time.

•  Always boil cold water to improve 

the quality of your hot drinks.

To increase the appliance’s lifetime:

•  Empty any remaining water from 

the kettle after each use.

•  Regularly remove any scale from 

inside the kettle.

Any slight marks or rings inside the 
kettle are normal and due to 
functional inspections which are 
performed on each unit before 
packaging.