Profi Cook PC-TKS 1056 - Инструкция по эксплуатации - Страница 48

48

5.  Only connect the machine to a properly installed 

safety socket.

6.  Set the switch on the water kettle to the “

I

” posi-

tion. The indicator lamp on the handle will light 

up.

Pausing/terminating operation

There are two options to interrupt the boiling pro-

cess or to terminate it:

•  The appliance will shut off automatically after 

the boiling process. The indicator lamp will go 

out.

•  Set the switch to the “

0

” position to pause or 

terminate the boiling process.

WARNING: Danger of scalding!

•  When pouring the water out, keep the lid 

closed.

•  During operation the housing becomes hot. Do 

not touch it and allow the device to cool down 

before storing it away.

CAUTION:

•  Do not remove the appliance from the base 

without shutting it off first.

•  Also ensure that it is shut off before setting it 

back onto the base.

•  Disconnect the power cord.

•  Emptying the water container.

Operating the tea/coffee maker

1.  Use the water kettle to boil water as described in 

chapter “Operating the water kettle”.

2.  Remove the filter. Measure the tea or coffee as 

desired and add to the filter.  



NOTE:  

•  You may also put tea bags into the filter.

•  Use medium or coarse ground coffee.

3.  Replace the filter in the tea/coffee maker. Make 

sure the square notch in the attachment is 

aligned with the handle.

4.  Take the water kettle from the base and carefully 

pour the hot water into the tea/coffee maker. 

Only fill up to the maximum mark (-- 8 --). Check 

the water level indication on the appliance for 

the current water level.

5. 

Tea:

 Leave the tea as indicated to steep and 

then enjoy.

Coffee:

 Wait 1-2 minutes and then enjoy your 

coffee.

Hotplate

You may keep the brewed tea/coffee warm by 

switching on the hotplate underneath the tea/coffee 

maker.



NOTE:   

The buttons on the base station are touch but-

tons. Slightly touch the buttons with a finger to 

select the function.

•  Press the 

 button to turn on the hotplate. The 

pilot lamp TEA will light up. The display shows 

the temperature preset by the factory of 80 °C.

•  You can use the 

MOD

 button to select the 

warm-keeping temperatures preset by the fac-

tory for tea (80 °C) or for coffee (85 °C). The 

respective pilot lamp will light up.

•  You may use the 

 and   buttons to manually 

set the temperature for the hotplate. The control 

range is between 70 °C and 90 °C.

CAUTION: Danger of scalding!

The hotplate heats continuously, even if the tea/

coffee maker is not on the plate. Always switch off 

the hotplate if the tea/coffee maker is not on the 

plate or if the tea/coffee maker is empty.

Automatic shut-off

The hotplate will shut-off automatically after  

60 minutes, if no entry was performed on the 

control panel within that time. The notification in the 

display will go out. This circuit serves your safety.

Stop operation

•  Make sure that the hotplate is shut-off.

•  Then disconnect the mains cable from the wall 

socket.